clemsonfor
Minister of Fire
Yea at work we have a slope mower for mowing the back of the damn. Its that tractor company...what are they called that make the gas powered tiny wheeled front attachment tractors. Power something I think?
Oh nice Got me thinkin'...I have a '10 SCrew 4x4 5.4L. Maybe some day, what did that run you if you don't mind me askin? Any issues with anything?Yep.
I installed the Blower in 2011. Totally stock on the outside. Even run the exact same tire that came from the factory.
Truck is an 08 F150 FX4 SCREW 6.5' box.
Oh nice Got me thinkin'...I have a '10 SCrew 4x4 5.4L. Maybe some day, what did that run you if you don't mind me askin? Any issues with anything?
Mine weighs around 63-6400 with me in it, and I don't beat on mine either. Just a nice work truck, XLT 5.5' box with 35's on it. Just turned 38,000 miles
And for around the house, my 1972 IH Cub Cadet 149. 14hp Hydro drive
View attachment 90715
And I thought my '89 was getting old...
07 Ram 2500...with the 5.9 cummins, last of the 5.9 before the changes. Also my M101 trailer
I absolutely love the trailer. Its worth its weight in gold...Tows like its not even there when its fully loaded. It measures 5.5x8", bump breaks, and rated for 3500lbs payload. I have put way more than that in it and its been fine. I really like the pintle set up for off road usage. Below is a generic copy of the specs.
Best part, bought it at military auction for $350 with new tires. I have hauled over 30+ cords in it and it just keeps going. I have the canopy for it too but never use it.
Here are my wood hauling photos.
Its finally been cold enough this week to haul in some more fuel from "out back" in my woods. Used my chained JD mower and cart the first few days. Today I hooked the trailer up to the Highlander and went out for a load of some 3 year old ash and pignut that had been laying in the woods. Cut the pignut in the trailer in the first photo with a plain 036 that I just finished putting a "Pro" compensating carb ($24 shipped from Hong Kong) and "Pro" large-bearing/rim sprocket on, both OEM. The saw already had the adjustable oiler, but no decomp valve. Jury-rigged up a new tank vent since the old style vent blocked the new pro air filter. It cut real nice with a 20" bar on it.
Can anyone identify that tree right behind my left shoulder?
View attachment 90877
That same tree is just behind the car, another slightly bigger one to the right by the downed red oak top........ I have 110 tops like that down on the ground from timbering last May left to cut. The kids 10'x13'x13' triangular tree house (my deer stand) is in 3 beech trees behind it. Those heated leather seats in the Highlander sure feel good on your butt after a few hours cutting out there in 14 degree temps .
View attachment 90878
Pulling back up into the yard.
View attachment 90879
View attachment 90880
It all goes down into the "Bilco" door pit and into the Charmaster combo furnace in the basement.
View attachment 90881
I've use everything here to "haul wood" depending on the ground conditions................ wheelbarrow, cart, and trailer!
View attachment 90882
07 Ram 2500...with the 5.9 cummins, last of the 5.9 before the changes. Also my M101 trailer
8x18 trailer full of oak
We use essential cookies to make this site work, and optional cookies to enhance your experience.