Just received my Englander 32-NC, any advice?

[Caw]

I used some folded lead flashing for mine. Coins should work well too.

 

[Hexa Fox]

I used some folded lead flashing for mine. Coins should work well too.

This stove cost me another nickel. If you catch my drift. It does not move at all now.

 

[30WCF]

Yep. You should be able to shim that on brick.
Edit. Typing at the same time. Good deal with the nickel.

 

[weee123]

I think with double wall there’s an adapter that goes into the stove first before the double wall. I could be mistaken though.

 

[Hexa Fox]

Okay so when I go to line my chimney I want to give it some support so it is not free hanging above my cleanout. So my idea was to add something like pebble stone to my cleanout up to my thimble so the bottom of the tee sits on the rock. I liked begreen's idea of adding an extra section of pipe and another tee for a cleanout but I think my ash cleanout is too tight and would not work without modification. I would love to here other ideas and what you think of the pebble stone idea.

I think with double wall there’s an adapter that goes into the stove first before the double wall. I could be mistaken though.

This is why I planned it like this. So I can go to my local hardware store and by some stuff that I think might bridge the gap and just return it. I may go check some of it out today.

 

[Hexa Fox]

I think with double wall there’s an adapter that goes into the stove first before the double wall. I could be mistaken though.

Just looked into this and this seems to be the case. Thanks for the heads up.