I picked this up from CL a few months ago for a few bucks. It was listed "parts saw". The guy said he lent it to his buddy and now it don't run. I was hoping it would be something simple like a carb problem, but when I pulled on the starter rope I knew the piston was shot, no compression.
When I removed the cylinder it was clear why their was no compression, piston was very scored.
I did the muratic acid cleanup to the cylinder and was able to restore it to good condition.
A new OEM piston and ring kit was only $14 from Baileys. It also needed a few parts for the chain break. I also replaced the bar and chain.
I tried running it last month, it would start OK but bog and stall when cutting. Yesterday I replaced the fuel line and filter and that cured the problem.
I ran about half a tank of gas through it cutting up some odd ball wood, seemed to work well.
Another one saved from the scrap heap. And another to add to the collection.
When I removed the cylinder it was clear why their was no compression, piston was very scored.
I did the muratic acid cleanup to the cylinder and was able to restore it to good condition.
A new OEM piston and ring kit was only $14 from Baileys. It also needed a few parts for the chain break. I also replaced the bar and chain.
I tried running it last month, it would start OK but bog and stall when cutting. Yesterday I replaced the fuel line and filter and that cured the problem.
I ran about half a tank of gas through it cutting up some odd ball wood, seemed to work well.Another one saved from the scrap heap. And another to add to the collection.
![[Hearth.com] I got a "new" saw (project saw)...](/talk/data/attachments/31/31045-5c2f8c25984ed9a8cb04a32efdf68f1b.jpg?hash=cn29NoJNZO)
![[Hearth.com] I got a "new" saw (project saw)...](/talk/data/attachments/31/31046-d62d278711e843cfc775e04b7e007fd9.jpg?hash=BtBEAomPbF)
![[Hearth.com] I got a "new" saw (project saw)...](/talk/data/attachments/31/31047-69675480d50b7e5816b59876d700fb9d.jpg?hash=9LXDGwTDr_)
