I am doing the math and this makes sense.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
Are you guys really talking about splitting 4-6 full cords (not face cords) in 2 hours??? I can't see how you can do it. If the logs are easy to work with (not too big) it takes me a couple hours to split 1 cord with my hydraulic splitter. I've cut, split, and stacked 14 cords in the last year. I move at a solid pace and I have no idea how you could come close to splitting 4-6 cords in 2 hours.
I give up ... By your logic all splitters have the split at the same rate? And having two extra sets of hands will not speed up the time ..and stop with the face cord bs... I know what a cord is in one previous post a guy tells me he split 10 cords by hand, now your telling me its impossible to for 3 guys to do 2 in an hour???

You guys are all correct I am going to buy a splitter, and a truck to get it home , and for good measure a tractor to move the wood and grade the area where I removed trees , when I'm done grading ill put in a new garage for the truck,tractor and splitter. And since money is no object I'll quit my job to free up time.

I bought a stove because I have over 100 trees to take down and the cost of removing the wood was insane, I figured I'd burn . I don't want to turn my house into green acres, and spend thousands on equiptment.

My math was this ... 1 day, spend say 150for 3 hours of labor, with the 2 cords I already split lets say the can do 5 ... That's about $22 a cord and I'll I have to do to get ready is fell and buck trees that need to come down.
 
Sorry for trying to help. It doesn't matter if you know what a cord of wood is. The question is does the craigslist guy know what a cord of wood is? I have split wood by myself, with 1 other guy and with 2 other guys. The craigslist guys says he can split up to 2 cords an hour and I am raising the BS flag on that. You asked for input and I gave my experience. Why ask a question if you don't want to hear people's answers?
 
  • Like
Reactions: scooby074
Everybody rest.

Hire the guy and see what happens.
 
My math was this ... 1 day, spend say 150for 3 hours of labor, with the 2 cords I already split lets say the can do 5 ... That's about $22 a cord and I'll I have to do to get ready is fell and buck trees that need to come down.

$150/5 cords = $30/cord.

I'm guessing you'll be 4 hours for the 5 cords, or $40/cord.

Be sure to post the results (pictures would be nice too) - someone should get a pool going....
 
  • Like
Reactions: scooby074
Everybody rest.


Dang it Bart! it was just getting good. I just got my slippers on and popped some corn. shucks, guess I'll have to watch re-runs.
 
Are you guys really talking about splitting 4-6 full cords (not face cords) in 2 hours??? I can't see how you can do it. If the logs are easy to work with (not too big) it takes me a couple hours to split 1 cord with my hydraulic splitter. I've cut, split, and stacked 14 cords in the last year. I move at a solid pace and I have no idea how you could come close to splitting 4-6 cords in 2 hours.

I can't see 4-6cords in 2 hours... unless one has help and a fast splitter with a 6 way wedge. by myself, I can split about a cord an hour... my splitter, while reliable is fairly slow, and this would be a cord an hour taking rounds from one pile, splitting, and tossing into the bed of the pickup. I was a little slower today, those 28" oak rounds were a groan on my horizontal splitter
 
$150/5 cords = $30/cord.

I'm guessing you'll be 4 hours for the 5 cords, or $40/cord.

Be sure to post the results (pictures would be nice too) - someone should get a pool going....
I was counting the two I already had... Thus 150 divided by 7... I am just frustrated that most people here don't read a whole thread before responding ... And yes I think two cords an hour is a little unlikely . my problem is without heavy machines I will have to split some of the large rounds just to get them in my cart. And if I star splitting it I might as well finish.
 
Last edited:
It says $50/hr with 2 hour minimum... worse case scenario is they're slow, you send them packing after 2 hours and you've spent $100 to get some wood split.
 
Yeah, I really doubt their self proclaimed output speed, even with a kinetic style splitter, 2 full cords per hour would be HUMPING! Heck, my brother had his buddy bring over their new firewood processor last year, this > (broken image removed) it is supposed to be rated something like 4 cords per hour, they ended up at about 10 cords in six hours. But, I will say that was with a lunch break, and they were still getting used to their new machine.
Bottom line, I agree, spend $100, see what happens, report back.
 
Are you guys really talking about splitting 4-6 full cords (not face cords) in 2 hours??? I can't see how you can do it. If the logs are easy to work with (not too big) it takes me a couple hours to split 1 cord with my hydraulic splitter. I've cut, split, and stacked 14 cords in the last year. I move at a solid pace and I have no idea how you could come close to splitting 4-6 cords in 2 hours.
Not 2 hours, 7 hours we started at 6 am.
 
I should add to my posts that It wasn't a grapple load, I scrounged 6 cords of oak already bucked, more than half of it was the right size so a lot of it was already the right length and just needed splitting, I split 2 cords on my own and it was taking so long because of my hip I hired a guy to help me finish. Probably a different situation than the OP but 2 guys can do some damage. I didn't stack it that day either, I had a big pile that took me a couple weeks to stack.
 
I was counting the two I already had... Thus 150 divided by 7... I am just frustrated that most people here don't read a whole thread before responding ...

I read what you said.

My math was this ... 1 day, spend say 150for 3 hours of labor, with the 2 cords I already split lets say the can do 5 ...

So does that mean you're going to get them to re-split the two you already split? That looks like you said they can do 5 to me - assuming that 'the' is 'they'.
 
So I have been talking with the guy with the splitter, and he called me today to say he was going to be in the area . It was raining and I was working on my wood shed project. He said he could stop by for an hour or two if I needed him, but he did not have his helper. I decided to try him out. I wasn't really prepared and did not have enough rounds in the yard they were littered throughout the woods. So after talking to him I tried to carry out as many as possible.
His splitter was fairly large with a 14 horse Honda engine and he had multiple blades for splitting, but he mainly used a 4 way. It was fast if I had enough rounds I think we could of done 1.5 to 1.75 cords in an hour, but 2 was never going to happen. in 45 min we did about 1.25 cords, and I ran out of close by wood. What slowed it down were the really large rounds over 30", the 4 way splitter made a mess of them, it actually slowed it down the process. They just didn't split clean, and there was a lot of man handling. We agreed to $60 for his time and we were both happy.
So what did I learn? If I was ever going to do this again I would wait until I had more rounds in one area. The 4 way splitter is awesome on logs 12-18 inches in diameter, one push 4 split pieces. And mostly I learned that I probably will not buy a splitter until I can't swing an axe. For 3 reasons.

1. It's a lot of work to get rounds into my cart and move them to the driveway to be split. It's easier to split them by hand and load a cart and go right to the wood pile.
2. I would need a garden tractor or owning the splitter would not make sense. To save real time I would either need to bring the splitter into the woods or something that could carry the wood out quickly. But a small cart loaded with rounds wants to flip, so a bigger trailer would be needed. The other option would be a small light splitter that I could wheel around the property, but that would get old quickly.
3. This is where my OCD kicks in, hand split wood looks better, and I have more control over the size and shape of splits. I have not stacked the wood we split today yet but I have a feeling the fiskars will be re- shaping splits for stacking.

So next topic I need a good hand cart
 
thanks for reporting back... sounds like $60 well spent
 
Status
Not open for further replies.