Encore 2040 cat C burns too fast

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
One last update: I replace the door gaskets, and griddle gasket. Between that and plugging the two secondary holes it’s like a whole new stove.

So moral of the story, replace all your gaskets before you dive into troubleshooting… $30 in material, for a huge difference.
 
  • Like
Reactions: arnermd and skb31
I had so many problems with my 2022 Encore cat c. It would over fire all the time. I was constantly messing with it throughout the burn. I had all the gaskets replaced twice, 6 or 7 service calls. Tried all the tricks, blocking off the two EPA holes with magnets, blocking off the secondary, plugging two out of the eight holes inside the stove. I finally found a permanent fix. I junked the stove and bought a Blaze King Princess! I now get 12 to 20 hr burn times depending on temp. Load, set thermostat and don’t touch it again until it’s time to reload. Its amazing. Got my life back.
 
  • Like
Reactions: arnermd