I have a franklin stove with an 8 inch opening since the damper is 1 1/2 below the opening so I am not able to use an adapter which fits inside the opening. I am connecting to 8 inch 22 gauge stove pipe. I was thinking about a draw band. Any other suggestions would be appreciated.
adapter for franklin stove
- Thread starter rfhjr
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
My Suggestion you may not want to hear but you need to scrap that thing or use it outside for a firepit, honestly those things are not controllable and have run away on many a burner and are not safe.
Thanks for the message. I understand your point, the stove is in the middle of my workshop on a cement floor. I do not keep anything combustible near it as they are dangerous. I guess I could remove the damper and use an adapter.
Adapters are going to be hard to find, if you can find one you have to buy the stove it comes with. Best bet would be to buy a rectangle to round insert boot adapter that would sit on top of the stove and then go to 8".
It would look like this:
(broken image removed)
It would look like this:
(broken image removed)
If it is the classic U.S. Stove design Franklin fireplace then you need an eight inch oval to round boot.
(broken link removed)
Give Woodman's a call at (603) 522-8216
(broken link removed)
Give Woodman's a call at (603) 522-8216
- Status
Similar threads
