Just a little warning. My chimney is only about 14'. I've never been able to make sparks come out the top no matter how hot or how far open the draft was or even with the door wide open. I live in the woods with lots of leaves on the ground so this was important for safety reasons for me to try and make it do this on wet days after first installing the stove. I've always felt comfortable while burning the wood stove since then.
Yesterday we had sustained 60 mph winds. A tree came down blocking my drive and just missing my truck. It was near dusk and i was out cutting up the tree when i saw sparks flying out my chimney. I ran in the house where my friend had opened the stove door to better see the flames and warm her self. It was only open a minute or so but with that 60 mph wind it was running like a jet engine.
Luckily no sparks reached the ground still hot enough to start a fire but if they had in that wind there would have been no stopping it.
So if your situation is similar to mine, keep the door shut when windy and when your reloading your stove, pick out your wood first and have it ready. Don't open the door, then go looking for the pieces of wood you want to put in. Stay safe : )
Yesterday we had sustained 60 mph winds. A tree came down blocking my drive and just missing my truck. It was near dusk and i was out cutting up the tree when i saw sparks flying out my chimney. I ran in the house where my friend had opened the stove door to better see the flames and warm her self. It was only open a minute or so but with that 60 mph wind it was running like a jet engine.
Luckily no sparks reached the ground still hot enough to start a fire but if they had in that wind there would have been no stopping it.
So if your situation is similar to mine, keep the door shut when windy and when your reloading your stove, pick out your wood first and have it ready. Don't open the door, then go looking for the pieces of wood you want to put in. Stay safe : )