The Chimney Sweep Logo
The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

Pacific Energy's Logo

THE FP16 BUILD-IN FIREPLACE
EPA Approved

Sweepy Zero clearance wood fireplaces are designed to be installed where no fireplace currently exists. Backed up to a combustible wall or inserted into an opening cut into the wall and then framed in with standard wood framing, zero clearance wood fireplaces are an ideal way to add a fireplace to your construction or remodel plans without the expense & hassle of a masonry fireplace structure.

Most zero clearance wood fireplaces are extremely inefficient, sending 90% of the heat from the fire (and 40 - 60 grams/hr of unburned particulates) up the chimney. Pacific Energy's FP series models are different. The FP16 is a high-efficiency, EPA approved woodstove encased in a zero clearance cabinet so it can be built into the wall like any fireplace!

 

Pacific Energy FP16 Standard Features:

  • Airtight Construction for maximum efficiency
  • Pacific Energy's patented Extended Burn Technology
  • Dual 45 cfm thermostatically controlled blowers
  • Large, Single Door maximizes fire view
  • Airwash design for stay-clear fire viewing
  • Limited lifetime warranty
  • EPA Approved at just 3.09 grams/hr
  • Trouble free non catalytic design
  • Boost Air setting for easy startup
  • Zero Clearance - installs in wood-frame wall
Pacific Energy Build In Wood Fireplace Cutaway View

 

Specifications: Pacific Energy FP16 Wood Fireplace

*UL Listed *EPA Approved *Manufactured Housing Approved

Heating Efficiency:
Particulate Emissions:
Maximum Output:
Heating Capacity:
Firebox Size:
Hardwood Capacity:
Maximum Log Length:
Front Panel Dimensions:
Shipping Weight:

70.2%
3.09 grams/hr
70,000 BTU/hr
1000 - 1500 sq. ft.
1.6 cu. ft.
32 lbs.
18"
23-7/8"T x 34-1/8"W
475 lbs.

Install Specs Button

Chart Button
Wood Fireplace Comparison Chart

 

 

Click photo to view the BIG picture
Pacific Energy FP16 with Contemporary Door
FP16 Contemporary Wood Fireplace

$2410
Pacific Energy FP16 Options:

Dual 45 cfm Thermostatic Blowers... Included
Outside Air Adapter ..........................
Included

Stainless Steel Front Trim Plate....................................... $105

Anchor Plate Adapter for Excel & DuraTech Chimney... $50

~Scroll Down for Chimney Info~


Order or Inquire Button

Shipping Zone Map
Approximate Terminal
Delivery Charges -
Click Here to E-mail us
for an exact quote

$160 - $360
$380 - $465
$470 - $585
$550 - $610

Pacific Energy FP16 Wood Fireplace with Arched Door
FP16 Traditional Arch Fireplace

$2410
 

Chimney Height Rules Diagram

The Pacific FP16 must be installed using at least 15' of 6" ASHT chimney. Here's how to figure out how many feet of chimney your installation will require:

The chimney must extend from the fireplace to a point at least 3' above the roof, and also 2' above any part of the roof within 10'. Example: If the roof peaks at 16' above the floor, and the peak is within 10' of the chimney location, the chimney will need to rise to a point 18' above the floor. We subtract the 45" height of the fireplace and determine that the minimum 15' chimney kit will work.

The FP16 is approved for installation with the following brands of manufactured chimney,
 available at hearth product shops, hardware stores and home improvement centers everywhere:

Security Chimney ASHT
Selkirk Metalbestos Ultra-Temp
DuraVent Duratech Class A
ICC Excel

Here are the basic chimney parts you'll need:

Cathedral Chimney Diagram  

Cathedral Ceiling
Chimney Kit:
1 - Rain Cap
2 - Storm Collar
3 - Roof Flashing
4 - Oval Firestop
5 - Chimney Lengths
6 - Anchor Plate

*Anchor Plate Adapter

*Roof Brace

Attic Chimney Diagram

Attic Penetration
Chimney Kit:
1 - Rain Cap
2 - Storm Collar
3 - Roof Flashing
4 - Insulation Shield
5 - Square Firestop
6 - Chimney Lengths
7 - Anchor Plate

*Anchor Plate Adapter

*Roof Brace

* Note 1:  If you opt for Excel or Duratech chimney, you must order an anchor plate adapter with your fireplace.

* Note 2: on steeper pitched roofs, more chimney will be needed above the penetration point. If the chimney extends more than 5' above its point of contact with the roof, it must be secured using a roof brace.

Order or Inquire Button

 

Home Button    Pacific Energy Button    Wood Fireplaces Button

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or Contact Us Button (our reply form)
Copyright © 1996 - 2019 The Chimney Sweep, Inc.