The Chimney Sweep Logo
The Chimney Sweep
Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

 INSTALLATION SPECS

Hearthstone Clydesdale 8491 Wood Insert

Dimensions... 22-1/2"T x 31-1/16"W x 23-15/16"D

Surround panel mounts in either of two positions to allow installation at various depths:
Flush Installation: 6-3/8" Extension onto hearth, 17-9/16" Extension into fireplace
Extended Installation: 10-7/8" Extension onto hearth, 13-1/16" Extension into fireplace

Hearthstone Clydesdale Wood Insert Clearance Diagram

A: Minimum Fireplace Opening Width.......................................... 33"
B: Minimum Fireplace Opening Height.......................................... 23"
C: Minimum Fireplace Depth at Floor............................................15"
D: Minimum Fireplace Depth at 20" above Floor.......................... 15"
E: Minimum Fireplace Width at 15" Depth.................................... 25"
F: Minimum Hearth Width..................................................... 38-3/16"
G: Raised Openings: Hearth Surface must be raised to level of firebox floor
H: Minimum Hearth Depth (including extension if needed), Flush Installations......... 24-3/8"
H: Minimum Hearth Depth (including extension if needed), Extended Installations... 28-7/8"
I : Stainless steel liner size.................................................................................................. 6"
J: Minimum Height from Hearth or floor of fireplace to Combustible Trim............... 46-1/2"
K: Minimum Distance from Centerline of Fireplace to 1/2" Combustible Side Trim.. 24-1/2"
L: Minimum Distance from Centerline of Fireplace to Combustible Side Wall.......... 27-1/2"
M: Minimum Height from floor of fireplace to Combustible Mantel.......................... 46-1/2"
M(a): Minimum Height from floor of fireplace to Combustible Mantel with Shield.... 33-1/2"

Mantel Shield Diagram

Area covered by surround panels....... 29-1/2"T x 47-1/8"W

Two Listed Methods for venting the Clydesdale wood insert:

Direct Connect Insert Diagram

Left: Minimum requirement. If the chimney is properly lined with terra-cotta liner tiles measuring 8" x 8" or smaller, a direct-connect installation is permitted. Remove damper assembly, cut and anchor a stainless steel sealer plate (removable for cleaning) at the throat of the fireplace. Insert a length of 6" stainless pipe long enough to reach into the bottom liner tile through a hole cut in the sealer plate.

Advantage: less expensive than full reline

Disadvantages: reduced updraft, increased creosote formation, insert must be removed to clean chimney.

Right: Preferred method, and required for zero-clearance fireplace installations or if existing chimney is unlined, if the liner is cracked or damaged, or if the flue opening is larger than 8" x 8". Remove damper assembly, install a 6" stainless steel liner the entire length of the chimney.

Disadvantage: more expensive to install

To read more about installing your stainless liner, click here.

Full Reline Insert Diagram

Install Manual Button
Click to View or Download the installation manual in .pdf format

To return to the Clydesdale Insert page, click here. For other options, click a button below.

Wood Inserts Button   Hearthstone Logo Button   Home Button 

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or Contact Us Button (our reply form)
Copyright © 1996 - 2019 The Chimney Sweep, Inc.