That's awesome and looks great for an insert. If it had a settable alarm function it would be perfect.
Wood stove automation using the Raspberry Pi
- Thread starter MisterFixIT
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
I think thats commercially available for cheap. something like this. $15.
(broken link removed to https://www.ebay.com/itm/110V-240V-Alarm-PID-CI00FK07-Temperature-Control-set-max-40A-SSR-K-Thermocouple/401294922415?epid=1783944317&hash=item5d6f0a92af:g:N4AAAOSwydpa8q56:rk:14
f:0)
That has a PID controller in it, no idea how that would actually be implemented on a stove... but I guess you could just ignore it and have it monitor the thermocouple and act as an alarm.
I am still looking for remote monitoring, so thats not for me. Even my current setup is only a quick setup until i get around to getting remote monitoring.... 2 little kids and a job sure slows that down.
(broken link removed to https://www.ebay.com/itm/110V-240V-Alarm-PID-CI00FK07-Temperature-Control-set-max-40A-SSR-K-Thermocouple/401294922415?epid=1783944317&hash=item5d6f0a92af:g:N4AAAOSwydpa8q56:rk:14
f:0)That has a PID controller in it, no idea how that would actually be implemented on a stove... but I guess you could just ignore it and have it monitor the thermocouple and act as an alarm.
I am still looking for remote monitoring, so thats not for me. Even my current setup is only a quick setup until i get around to getting remote monitoring.... 2 little kids and a job sure slows that down.
Just joined the forum and this is my first post. I just built a damper control with the Raspberry Pi and have it ported to my computer and cell phone. Still building the blog for the how-to guide, but here's a teaser video with link to my blog...
This is for a small fireplace insert that I burn nearly continuous during the winter. Interested in any comments that the forum might have. Link to blog: https://smartstove.blogspot.com/
Thanks,
Scott
This is for a small fireplace insert that I burn nearly continuous during the winter. Interested in any comments that the forum might have. Link to blog: https://smartstove.blogspot.com/
Thanks,
Scott
Last edited:
Thats great, first project with a linear actuator i have seen so far, i like that. I have managed to get my raspberry pi to output air temperature to a web server. I havent been able to get it to read a thermocouple... Even usint the sample sketches for the chips dont work. Literally been wasting months on this. As best as I can figure out, I have managed to buy 3 MAX31855 which are faulty.... if they are wired right and cant work the sample sketches..... its got to be right...
I havent rules out the common denominator (me) yet....
I havent rules out the common denominator (me) yet....
Hahaha, Maverick that's the same thing I told my son - it would have taken me weeks. He looked at my code for a few minutes and figured it out. If you could post your code somewhere, he or I will take a look. Or you could use the MAX6675 like I did (for $7). Either way, the serial input on the Pi or any other device is not all that straightforward.
Similar threads
