Hi guys, just installed a new Vigas 60 with 1000gal storage and i seem to have a problem with my wood placement, I've read all the posts here and tried multiple strategies but the only one that seems to work for me is to load it which ever way, front to back (my wood is 16-18" long) two rows and come back after an hour or so and stir it up because the wood is all burnt close to nozzles and hung up every where else. Any ideas, should I be making smaller splits or what, i have roughly 10-12" diameter wood split in half or three. I would like to load it up 3/4 full and let er gas. Any suggestions would be great... Burning maple and white birch at 18-23% moisture, tubes are spotless and stack temps are usually 380-500°f . Thanks guys,learning alot on this site along the way.