Tri-axle load - $600

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

kestrel

Member
Hearth Supporter
Nov 17, 2009
89
Southcentral PA
Saw an advertisement for a tri-axle load of wood. Talked to the guy and he said they are 22' logs on a truck 8' wide by 12' high. That comes to 2112 cubic feet of wood or 16.5 cords (divided by 128 cubic feet per cord). Sound right or would it be a lot less after being split. How much less?
 
kestrel said:
Saw an advertisement for a tri-axle load of wood. Talked to the guy and he said they are 22' logs on a truck 8' wide by 12' high. That comes to 2112 cubic feet of wood or 16.5 cords (divided by 128 cubic feet per cord). Sound right or would it be a lot less after being split. How much less?

Sounds right to me. Will be more because once you split and stack there will be more gaps taking up more space.
 
The most I have ever seen on a strait truck is 10 full cords and that was way way overloaded. The average tractor and trailer around here carries 12 full cord.
 
My rule of thumb is a full cord when split and stacked needs about 180-190 cuft when in log length form. As it was said it really depends on how its stacked and the straightness of the wood. Around here a truckload of log length is usually 8-10 cord when processed so I would guess about the same.
 
Most triax loads here are around 7 cords and normally $700+....so, sounds like a good deal to me! Too bad he's not local to me or I would consider it!
 
1. There is no way the tri-axle is 12' high.
2. Per the other posters, the price is good for a tri-axle load, your just off in your math.
3. I've had a tri-axle of red-oak delivered. He gave me every crotch, Y, and crooked piece that he could round up. My truckload was more air than tree the logs where that bad. I had 3-4 cord at most.

It sounds like you have the potential for a good deal, it really depends on how well he loads it and how straight the pieces are.
 
I bought a triaxle load local to me and I got ALOT of air! No more than 5 cord at best.
The guy who owned the business assured me I would get 8-9. The man lied. Never buy from him again. Good luck!
 
mbcijim said:
1. There is no way the tri-axle is 12' high...
The load might be that high off the ground. Around here, max height is 13' 8".
 
mbcijim said:
1. There is no way the tri-axle is 12' high.
2. Per the other posters, the price is good for a tri-axle load, your just off in your math.
3. I've had a tri-axle of red-oak delivered. He gave me every crotch, Y, and crooked piece that he could round up. My truckload was more air than tree the logs where that bad. I had 3-4 cord at most.

It sounds like you have the potential for a good deal, it really depends on how well he loads it and how straight the pieces are.

Ya yur right. Bunks are usually 8' high.
 
I usually buy 8 foot cordwood but one year my source let me down. I try to buy my wood in Dec/Jan so that I can take delivery on frozen ground. That's the only way a heavy truck can get it to where I need it without tearing up my driveway and yard. Anyway, one year my 8 foot cordwood guy was not coming through for me and Spring breakup was looming so I had to settle for a load of log length. Like others mentioned, I got the most crooked and Y crotched you could ever lay your eyes on. It netted only about half what I paid for. Never again, unless the price is half.
 
Most people in my part of the world buy Tri-axle loads. They figure up to 8 cord. I have been contemplating it but have never done so myself. I was quoted 600 for a load of beech, but he was gonna tack on $50 for delivery. I can go about a year on 8 cord. I am guessing that would be 5-7 fuel oil fills (275 gal) 2.70 per gal X 5 fills X 275 gal = about $3700. Great way to save $3k, get some much needed exercise, and justfy the purchase of toys :coolsmile:
 
ISeeDeadBTUs said:
Great way to save $3k, get some much needed exercise, and justfy the purchase of toys :coolsmile:
Two out of three is the best I can do. Need to work on the toys part more. If Santa's reading this, it's still not too late to deliver that FEL. ;-)
 
Status
Not open for further replies.