I posted an earlier thread on an overfiring issue that I'm having. I did the dollar bill test on the door and I get resistance trying to pull the bill out on the top and both sides. The bottom however, I get no resistance. Is there an adjustment that I can do to pull the bottom in closer? Perhaps at the latch? I did see in the manual that there is a way to somehow adjust the door at the bottom right corner where there are two 7/16 nuts. I checked it out and I'm unsure exactly how they adjust the door to be honest.
On another note, the gasket appears to sit inside the hole that the latch assembly sits in. Seems to me that the gasket should make better contact with the front of the firebox just to the right of that hole otherwise couldn't I be getting draft in through there? The gasket is one year old as well.
Thanks all!
On another note, the gasket appears to sit inside the hole that the latch assembly sits in. Seems to me that the gasket should make better contact with the front of the firebox just to the right of that hole otherwise couldn't I be getting draft in through there? The gasket is one year old as well.
Thanks all!