Pellet Bags/true or not..

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I am 54 and lifting up a 5 gal. pail is getting harder for my wife. I can see this with a scoop and a bucket that holds 20 lbs would make life easier for her as well as me.
 
Maintaining a vacuum on large packages is a pain. Then there is the need to keep the sealer clean also to keep the seam sealed. Hard to find a soft vacuumed bag past a gallon without it being inside a larger hard container. Pumping a large vacuum is not that hard with a vane pump.
My pups have 40lb bag of dog food shipped to the house all the time vaccum sealed well and everything. It may be possible but then the price would shoot up
 
I am 54 and lifting up a 5 gal. pail is getting harder for my wife. I can see this with a scoop and a bucket that holds 20 lbs would make life easier for her as well as me.
About 54 or 55 is where it begins. But I got to tell you I never could dream the difference from 60-65. Actually even from 62-65. I really started feeling the difference in many things I thought nothing of doing, between those years was the limit for me with my work and ended up retiring from my job. I had a huge upsurge in my work energy in my late 50's but that faded fast in my 63rd year and on. It not only was harder to lift, twist , push etc but it hurt too and then you realize no this is foolish. Well for me as a heavy truck mech anyway.
 
  • Like
Reactions: TonyVideo
My pups have 40lb bag of dog food shipped to the house all the time vaccum sealed well and everything. It may be possible but then the price would shoot up

Those are probably foil lined bags too - which definitely would make the price go up.
 
just read this on another forum
I too heard the holes were for letting the excess air escape. I think it may have been covered here many moons ago IIRC. There was also something that might have related to residual heat, But I'm old and can't remember Chit!

I also liked the windex thread you recently posted. Interesting! What is "This other forum" you speak of?
 
I too heard the holes were for letting the excess air escape. I think it may have been covered here many moons ago IIRC. There was also something that might have related to residual heat, But I'm old and can't remember Chit!

I also liked the windex thread you recently posted. Interesting! What is "This other forum" you speak of?


Off gassing caused by the residual heat (I believe OM) was also one of the reasons for the holes IIRC but I too am very old and further I am actually trying to forget stuff I once knew so I can pass a lie detector test when I tell folks I don't know when I used to. Maybe one could ask ScotL (a member here) as he sort of actually operates a pellet mill.
 
  • Like
Reactions: jtakeman
I am 54 and lifting up a 5 gal. pail is getting harder for my wife. I can see this with a scoop and a bucket that holds 20 lbs would make life easier for her as well as me.


You need a coal hod or a younger wife ;).
 
I have a 2Qt plastice pitcher and I scoop and dump till about half way empty... maybe 7 scoops.
then pick up and dump the rest at 20 pounds and not 40..
 
You need a coal hod or a younger wife ;).

Don't do the younger wife, I can tell you its not all its cracked up to be. I am intrigued by the vacuum sealing of pellet bags. As fragile as they are, I wonder if too much negative pressure inside the bags would crush the pellets..or, could the act of vacuuming draw some fines out with the right filter? Could the bags be formed in a way that they could end up being stacked post vacuum?
 
Don't know if they would stack easier.
like someone here said, would be like stacking balloons that would roll around..
The key word is 'vacuum', which would give you a tightly compressed 'brick' of pellets until you broke the seal. Same as a 'brick' of yeast. Some coffee is packed like that in a cube.
 
On thread, I would assume that ordering bags with perforations or slits would be more expensive that a plain plastic bag.....

Unless they're bagging by hand, the bags aren't pre-made. They are bought as rolls of printed film folded in half with the fold on the bottom. The bagging machine reads the eyemarks on the film to determine where the impressions are. It cuts and welds the sides and at the same time perforates the film with needles. Then it's filled and the top sealed then palletized then covered with a hood. I linked a video so people can see how it works. Some baggers, like the one in the video, also seal off the bottom corners of the bag so they aren't pointed.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
I think the holes are put in by tree hugging ecoterrorists with ice picks. Just cuz...
which ones ?? BP, Exxon ? Haliburton ... so many to choose from
 
  • Like
Reactions: SmokeyTheBear
Status
Not open for further replies.