Is covering your wood stacks essential?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
Just the top. You want air to get to the wood and you don't want to trap moisture in the stack.

I have fallen head over heels for rubber roofing. Hogs was right :p
 
I have been known to use a little rubber roofing.

[Hearth.com] Is covering your wood stacks essential?
[Hearth.com] Is covering your wood stacks essential?
 
I have fallen head over heels for rubber roofing. Hogs was right :p

A few years ago I went to a bankruptcy auction for a local landscaping company. I was there to buy a generator. Got that and then the last item up for bids was an $800 roll of 45 mil EPDM pond liner. Nobody knew what it was and nobody but me bid on it. Got it for five bucks.
 
A few years ago I went to a bankruptcy auction for a local landscaping company. I was there to buy a generator. Got that and then the last item up for bids was an $800 roll of 45 mil EPDM pond liner. Nobody knew what it was and nobody but me bid on it. Got it for five bucks.

Life time supply ????

It helps "bake" the fire wood. That's my experience.
 
When I finally built the shed I used some of it for roofing on the shed. So it is still "top covering" wood.
 
  • Like
Reactions: Dix
I've got 12 cord stacked on pallets on a 15'x40' concrete pad near the front of my property that is all top-covered with 6 mil black plastic and I only get complements. I agree that if not done right it can appear shoddy, but stacks can be made to appear very nice.
I agree. I have about ten cord stacked in long rows and top covered with black 6 mil. I trim it with a little overhang and staple the ends of my eight or twelve foot stacks. You can't even see it until you're right up to it.
 
Absolutely mandatory to top cover for me. Lots of rain, humidity and my lot is densely treed, which in addition to all the leaves acts as a windbreak. I left a couple stacks of elm uncovered for 6 months and when I went to move them earlier this summer, they covered in clumps of wet leaves. The leaves had begun to decompose and and feeding water into the wood and making them filthy. Moisture meter gave me a 35% reading, which is practically the same as when I first c/s/s. All my covered wood has dried nicely. The only wood I'll leave uncovered now is the crappy pine and poplar, and only if I don't have a tarp for them.
 
A few years ago I went to a bankruptcy auction for a local landscaping company. I was there to buy a generator. Got that and then the last item up for bids was an $800 roll of 45 mil EPDM pond liner. Nobody knew what it was and nobody but me bid on it. Got it for five bucks.
That's a score. I'm becoming a top cover convert. I have three year oak that just gave me a sizzle. My drying conditions ain't the best round here.Cut my old pool cover up to use as for top covering. It's a glorified tarp but doubled and tripled over it should hold up for a couple years. But I need to land some of that rubber stuff or at least some metal roofing.
 
Many people get used rubber roofing free from local roofing companies that tear it off doing re-roofing jobs.
 
One thing that I've been doing the past few days that has worked really well:

With my stacks of wood that are seasoned and ready to go, but not under cover, if there has been a bit of rain or snow and I want to get some from the stack, I'll pick 5 big pieces and bring it in to bake right in around the stove for the day. By the evening the pieces are nice and dry, and ready to burn that evening or to load the stove for the night.
 
I cover the wood I intend to burn this year with a tarp in the fall. A tarp usually covers two rows of stacked wood, so there is adequate circulation.
 
One thing that I've been doing the past few days that has worked really well:

With my stacks of wood that are seasoned and ready to go, but not under cover, if there has been a bit of rain or snow and I want to get some from the stack, I'll pick 5 big pieces and bring it in to bake right in around the stove for the day. By the evening the pieces are nice and dry, and ready to burn that evening or to load the stove for the night.

I've found this technique to be essential this year, because all I have to burn is seasoned maple and punky ash. The ash soaks up ambient moisture like a sponge, so I have to dry the logs out under and around the stove before they're fit to burn. I just starting top covering this year myself.
 
Status
Not open for further replies.