I Built a Firewood Calculator (total cordage, cu/ft, weight, BTU and more)

[BCB]

I have built a firewood calculator and hopefully some of you might find it useful, it is a bit different from others I have seen so far online.

• Calculates total cordage based on woodpile size as well as total cubic ft. Cordage is outputted both in cord and face cord as both are widely used depending on area. It also shows aliases for both cord types for example a Face cord is known as a "Rick" in some places and a cord can be known as a bush cord or standard cord.

• Gives an estimate on weight depending if you chose dry or wet

• Gives estimated "Heating Energy" (BTU) as well as equivalent in electrical (kWh), and heating oil (gallons). This is also dependent on whether dry or wet as BTU changes substantially.

• Fun random firewood fact displayed at bottom on each calculation.

Hope you find it useful: https://boisafeudunord.com/tools/cord-calc.html

Appreciate feedback, and if there is something you think should be added, let me know.

 

[BCB]

Did some updates.

- Added energy equivalents of propane and natural gas.
- Removed need for .html in URL
- Few mobile version fixes
- Calculator now lives at: https://boisafeudunord.com/tools/firewood-calculator
- All requests to the old URL are redirected to the above
- Added social cards data and image
- Added breadcrumbs
- Added tooltip to Wood Condition

 

[BCB]

Few more updates, I have split some wood types due to substantial differences in BTU, weight etc.

• Birch is now white birch and yellow birch
• Oak is now white oak and red oak
• Maple is now red maple and sugar maple

 

[Wisco Shepherd]

Id like to have silver maple. And wood pile width as well.

 

[BCB]

Id like to have silver maple. And wood pile width as well.

Sounds good I will add silver maple. Woodpile width is set on the Piece Length field.

 

[BCB]

@Wisco Shepherd Silver Maple has been added.

 

[BCB]

Few small updates to the mobile version.

If anybody would want to imbed the calc or even have a full version on their site it is pretty simple as I created an API for it.

 

[BCB]

Sooo I got the multiple wood types completed today, mixed load calculations now possible!

You can select up to 4 "WoodTypes" and set a % for each (must equal 100%). Weight and BTU totals will be affected by this change.

 

[BCB]

The calculator has been used 500 times in the last 24 hours, great to see!

Few more things incoming:

- Option to use it in "stack" mode or pile mode for loose piles.
- Switch between metric and imperial
- Some more wood types to add
- In stack mode options to set number of rows and gap size.
- Option to set wood stove / burner efficiency %.

 

[BCB]

There is now a new version available:

- You can switch between Metric and Imperial
- Set burn efficiency
- More wood types added
- Bunch of small fixes, some organizing the layout, top menu improved for mobile
- API moved to a bigger server

Have a safe and happy holidays!