Also, 16 inches isn't much in front of the door. Stuff spills out all the time. Consider making the hearth bigger, you'll be happy later.
Hearth pad values
- Thread starter loneeagle15
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
goose,
thanks, thats sorta how i read it (original poster did have a mansfield in the signature), but agree that if you may be changing out stoves in the future, build it for the worse case scenario, ie nuclear reactor stoves.
thanks, thats sorta how i read it (original poster did have a mansfield in the signature), but agree that if you may be changing out stoves in the future, build it for the worse case scenario, ie nuclear reactor stoves.
Madison
Go back to your Mansfield manual and read further: "An acceptable floor protector is a 3/8 (10 mm) minimum
thickness non-combustible or listed floor protector with an R factor of 1.0."
That's not much of an R factor. The Hearthstone Homestead I'm considering with 6" legs requires an R-factor of 2.4, and with 4" legs that jumps up to R - 6.6 !!
Go back to your Mansfield manual and read further: "An acceptable floor protector is a 3/8 (10 mm) minimum
thickness non-combustible or listed floor protector with an R factor of 1.0."
That's not much of an R factor. The Hearthstone Homestead I'm considering with 6" legs requires an R-factor of 2.4, and with 4" legs that jumps up to R - 6.6 !!
- Status
Similar threads
