Harman pc 45 slide plate

[chefiam1]

Stove stopped running! after searching i spun the stove around and watched the
pusher arm not going all the way down to the cam bearing. took it apart slid the
plate back and forth. spun auger till all pellets were clear of auger. put back together ran 15 min, same thing happened. took it apart again. still is apart with a hopper full of pellets. when the hopper was empty i sprayed a small amount of wd-40 inside fines box
now what

 

[rickwai]

Sounds like you may have something blocking the pellets flow. empty hopper and reach in from hopper and check for debris blocking it up.