Hello all - Have seen some initial discussions on the pricing of this unit but its a relatively new model and don't see much discussion yet on its performance. Would love to hear feedback on overall build quality, fan noise, heat output without the fan on (have been told by dealer that it's designed to move heat even without fan), effectiveness of the air wash at keeping glass clean, and any issues with the catalytic combustor (if it's not been an issue, would be interested in that too).
Feedback on Lopi Large Flush NexGen-Hybrid
- Thread starter Plegendy
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
It's a serious heater. The fans are fairly quiet but necessary for decent heating. The flush nature limits the convection without fan assistance. This is true with all flush inserts. There are several past posts on this insert. Here are a couple:
www.hearth.com
www.hearth.com
Lopi Large Flush Wood: my installation experience (including block-off plate).
First of all, I would like to thank this community. Without it I would simply end up with a regular non-insulated 6 inches liner and no block-off plate - that's for sure. So I am very thankful to everyone who ever posted here and to those who replied to my posts directly. THANK YOU! For the...
www.hearth.com
Lopi Large Hybrid insert -what temp to bypass cat when fire going out/cooling down
Hey guys, complete noob here so bare with me. I live in CT and have a 4500 sq ft home and am trying to use the oil furnace less for heat. So I just had a Lopi Large Hybrid insert installed into my mason fireplace. I have a few questions for you seasoned folks: 1. I run the cat up to about...
www.hearth.com
Thank you! Have you (or others on this forum) formed any impressions of the durability of the cat? I understand this stove has a new design, but there are complaints from some that the cat in the prior design was prone to failure. Would be interested if folks have a view on whether the new design resolves the issue. Dealer says the cat should last 10 years - seems optimistic but would be happy to hear otherwise.
"Should last" and "would last" are different. The dealer can't predict how the stove will be run, the fuel quality, frequency of burning, etc. The cat should last about 12,000 hrs. if well cared for. For some that happens in 2.5 yrs. and for others it's 10.
OP:
Some vendors (that is, I know of one) give a 10 yr warranty on cats (basically meaning you'll get your second cat for free, allowing for a no cost learning curve with mistakes, as it's rare one burns so little that lasts that long).
Is that where your number comes from?
Some vendors (that is, I know of one) give a 10 yr warranty on cats (basically meaning you'll get your second cat for free, allowing for a no cost learning curve with mistakes, as it's rare one burns so little that lasts that long).
Is that where your number comes from?
No, this is what the dealer told me when I expressed concerns about the longevity of the cat. I believe he said Lopi provides a 5yr warranty on the cat (but that it should last 10). As I read around I have seen a comment somewhere that the nexgen hybrid can operate without the cat (i.e. if the cat goes and isn’t replaced) and perform like the older cat versions. Anyone know if this is correct?
Last edited:
Similar threads
