Hi folks.. I hate "being that guy" who joins a site and leads off the first 5 seconds of membership by asking a question. But here we are.
I did do a little searching around and couldn't find the answer.. and I suspect I know the answer anyway, but I have to ask.
I have a Harman XXV, that's about 3 years old. I was running it last night, first or second time I've used it this season. Worked like a charm. As I went to bed I turned the fan dial to the white "off" zone and left the room. As I recall this is how the manual suggests to kill the stove and this is how I have done it all last year that I ran it.
However, this evening when I went out to turn it back on the panel was dead. All lights off. No power or status light. I checked the breaker and it wasn't tripped, there was power at the outlet. But when I plug in the stove, nothing.
Took the back panel off and it's quite clean and I didn't see any kind of fuses or circuit breaker or anything. I left it unplugged for a while in case there is a automatically resetable breaker and that doesn't appear to be the case.
So, at the moment I am down to the thought that the control panel itself is dead. I haven't opened the control box to see what's in there. I am ASSUMING only one board but I have doubts there is a reset button or anything of use on it.
Any thoughts here? Any better or worse places to order parts for this (otherwise great) machine?
As a side question, is there a way to use a wall mount thermostat on this stove?
Thanks a lot folks!!
I did do a little searching around and couldn't find the answer.. and I suspect I know the answer anyway, but I have to ask.
I have a Harman XXV, that's about 3 years old. I was running it last night, first or second time I've used it this season. Worked like a charm. As I went to bed I turned the fan dial to the white "off" zone and left the room. As I recall this is how the manual suggests to kill the stove and this is how I have done it all last year that I ran it.
However, this evening when I went out to turn it back on the panel was dead. All lights off. No power or status light. I checked the breaker and it wasn't tripped, there was power at the outlet. But when I plug in the stove, nothing.
Took the back panel off and it's quite clean and I didn't see any kind of fuses or circuit breaker or anything. I left it unplugged for a while in case there is a automatically resetable breaker and that doesn't appear to be the case.
So, at the moment I am down to the thought that the control panel itself is dead. I haven't opened the control box to see what's in there. I am ASSUMING only one board but I have doubts there is a reset button or anything of use on it.
Any thoughts here? Any better or worse places to order parts for this (otherwise great) machine?
As a side question, is there a way to use a wall mount thermostat on this stove?
Thanks a lot folks!!