Classic Bay 1200

[JGroUSMC]

Red on the right. View attachment 250428

Yup. That’s where mine is. I wondering if I bought a bad thermocouple.


Sent from my iPhone using Tapatalk

 

[Overfireinthehole]

It happens. You have to bend it to install it so the wires can break

 

[JGroUSMC]

I’ll have to check it out. I had a hell of a time installing. I ended up going through the back and bending it in a 90 degree angle. It was a bear to do it.


Sent from my iPhone using Tapatalk

 

[Ssyko]

Wow looks to me like quad can’t make up thier mind what position to place the bulkhead connector. 3 stoves 3 diff positions

 

[JGroUSMC]

Wow looks to me like quad can’t make up thier mind what position to place the bulkhead connector. 3 stoves 3 diff positions View attachment 250435

Yeah I see that. I’m really think I bought a cheap thermocouple and it’s not working.


Sent from my iPhone using Tapatalk

 

[JGroUSMC]

This is what I bought

Sent from my iPhone using Tapatalk

 

[Ssyko]

I got mine here and it worked great.

(broken link removed to https://pellet-stove-parts-4less.com/products/quadrafire-thermocouple-for-mt-vernon-ae-insert-compatible-part-for-oem-srv7034-247?gclid=CjwKCAjw0vTtBRBREiwA3URt7siV1uaRHvx7DdAjieHASoi7xIsJnutkFJ8ruOoC7ZWxnEoxYiqETxoCnPgQAvD_BwE)

 

[JGroUSMC]

I got mine here and it worked great.

(broken link removed to https://pellet-stove-parts-4less.com/products/quadrafire-thermocouple-for-mt-vernon-ae-insert-compatible-part-for-oem-srv7034-247?gclid=CjwKCAjw0vTtBRBREiwA3URt7siV1uaRHvx7DdAjieHASoi7xIsJnutkFJ8ruOoC7ZWxnEoxYiqETxoCnPgQAvD_BwE)

That worked in your CB1200? It doesn’t look anything like mine? Is that a better aftermarket version?


Sent from my iPhone using Tapatalk

 

[kappel15]

The one pictured is for the Mt. Vernon AE only. He is just stating where he got it. And you want OEM parts, not after market. kap

 

[JGroUSMC]

The one pictured is for the Mt. Vernon AE only. He is just stating where he got it. And you want OEM parts, not after market. kap

Gotcha. You guys are great. Is there any tricks to the trade with sliding this thermocouple around to get it in? It was a total B last time I tried.


Sent from my iPhone using Tapatalk

 

[kappel15]

Just take your time and be patient. And just google Quad parts, and lots of places will pop up. I've seen parts cheaper from one place to the next. And did you have your father in law test that one yet? kap

 

[JGroUSMC]

I just picked it up, he hasn’t tested the old one yet. When I was at the dealer, someone was talking about a modification they did to their pellet stove. He said he has a 1200 and he was able to run a hose or something to the air intake so it wasn’t under the stove. Have you ever heard of this?


Sent from my iPhone using Tapatalk

 

[kappel15]

Fresh air intake? Look in you manual

 

[Ssyko]

Yes the mod is doable but requires complete teardown and a lot of sealing of seams and a bit of welding to do it correctly.

 

[JGroUSMC]

So it WAS the thermocouple.... I bought a genuine part and it worked flawlessly. You guys are the best.

I enclosed a photo of the quality difference between the two thermocouples. I hope someone sees this one day and buys

a genuine Quadra-Fire part.


Sent from my iPhone using Tapatalk

 

[Ssyko]

Nice!! Glad you got it fixed!!

 

[JGroUSMC]

Nice!! Glad you got it fixed!!

Thanks to you guys. Thank you!!


Sent from my iPhone using Tapatalk

 

[kappel15]

Glad you are up and running. Stay warm. kap