Adjusting set point on AH-AK 010 Gasifier Controller.

[nckennedy]

Now that temps are colder I am trying to raise the set point on the Orlan 60 from 150 to 160 or higher. I am able to adjust (raise or lower) the variables in other modes, but not in the boiler temp. mode. Any idea what might be causing this situation? The factor reset is 150 degrees; but it still should adjust upward right?
Thanks,
Craig

 

[mark cline]

https://www.manualslib.com/manual/1216728/Eko-Vimar-Orlanski-Orlan.html?page=31
Read through the owners manual, pages 30 -31. I’m not familiar with your model but hopefully this should help you out .