thermostat

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. lp9900

    Seeking Blaze King Thermostat Coil Information

    Hello, I have an older Blaze King wood stove insert (non-cat) = approximately 1982. I believe it may be the KFF-402. The thermostat coil had an L leg shape that slipped into the end of the second rod that controls the air damper. Somewhere along the line, the L part broke off so the coil is no...
    • lp9900
    • Thread
    • blaze king thermostat thermostat question
    • Replies: 4
    • Forum: Blaze King
  2. J

    Englander smartstove with Nest thermostat

    Has anyone been able to connect a nest thermostat to their Englander Smartstove board? I would like to start my stove before I get to the cabin so we essentially walk into a warm cabin. I called Englander but of course they said it’s not possible to do. I see where you can take the jumper...
  3. CozyCornerWI

    Sharing Custom WIFI Remote Harman Control via Smartphone

    Hello fellow Pellet Stove Lovers, Just in time for the 2018/2019 Heating Season! I have searched and read thru info on using Skytech and WIFI Thermostats to control Pellet Stoves on this forum and elsewhere. While there's good info around- it can also be costly & confusing to try out. The...
  4. P

    Vermont Castings Encore Air Control

    I have a new VC Encore. I had a Jotul F3 for many years, and now I'm finding operating the Encore is a bit more complicated than the Jotul. I've now figured out how to get it going and then engage the catalytic converter. I do like the slow burn and it's generating way more heat than the Jotul...
  5. W

    Winslow PI40 new installwith questions

    I just installed a used Winslow PI40 pellet insert and the instructions do not have much information about install of a thermostat and I am interested in installing a wireless thermostat to avoid hard wiring it in. Also any advice on type and features that this unit may be able to take advantage...
  6. O

    Any "smart" thermostats that function like Thermguard

    So the extreme cold in the NE really have me paranoid about my boiler pipes. I currently have a p52i that I heat the whole house with but there are some pipes on outside walls in the basement that are not benefiting from this method of heating. I currently have 3 each building36 wifi...
  7. E

    Mt Vernon AE Error Code

    We just bought a used Quadra Fire Mt Vernon AE stove, I hooked up the thermostat and power cord just to see that it works properly and there is the error "Max Drop Tube Temp" on the thermostat. I've read forums on here and it seems to be an error for the flame being too high causing overheating...
  8. M

    Lopi AGP T-Stat problems

    My Lopi AGP pellet stove T-Stat function is intermittently working. When the T-Stat is engaged (green light on) and the thermostat calls for the heat the stove start up sequence begins and the stove fires. Once the room is at temperature and the thermostat closes the stove begins the shutdown...
  9. J

    5502m with lux 500u thermostat

    I just hooked up a lux 500u thermostat to my 5502m pellet stove. I understand that this stove will not shut down and refire. My question is... How do I know the thermostat is working with the stove? I haven't notice a difference in the sound of the blower. The room takes a few hours to warm up...
  10. I

    Newbie Pellet Stove Owner

    Hi: I recently installed an Ashley 5660 pellet stove with 55 LB Hopper. Overall I guess I'm happy with the stove, it throws out heat on high setting and heats my entire mobile home of about 1000sf. On the lowest setting it still does an OK job out back and a great job in the main areas...
  11. B

    Mt Vernon E2 thermostat voltage

    I just installed at mt Vernon e2 with a hard wired thermostat. I am having an issue whereas the stove continues to run regardless of the thermostat. For instance, it is set to turn if at 70 and the room is at 85. I have verified connectivity to the back of the stove and the thermostat. I...
  12. K

    Jotul Portland: Standing or Intermittent (Thermostat-driven) Pilot???

    Hello, I just purchased (last night) a Jotul Portland (GF 500) for a sunroom off our house, which has no other source of heat. I'm used to woodburning stoves, but because this is a room used all the time, I decided in favor of a gas stove in order to make it much easier to keep heated on a...
    • Kafka
    • Thread
    • gf 500 jotul portland standing pilot thermostat
    • Replies: 6
    • Forum: Jotul
  13. J

    Oil and Pellet stove one thermostat

    Hey everyone! New to the forum first post. Hoping someone can help me with this question. I have a Quadra fire pellet stove and an oil boiler for heating my home. When oil is cheap I run the boiler and when it's expensive I use pellets. I've been using one thermostat which is centrally located...
  14. JakeRandall

    Need help connecting wall thermostat

    I have a Serenac, or Tasman 40,000 stand alone pellet stove and it works fine. I recently bought the wall thermostat Braeburn 1000NC for it. The Tasman thermostat instructions dont tell me anything more than "connect thermostat here". And the instuctions on the Braeburn thermostat must assume...
  15. J

    Napoleon Torch needs a thermostat

    Hi, there new to the forums and gas fireplace installation. Here's a question for the electricians out there: Any fireplace used as a solitary heat source for my upstairs master bedroom must be operated by a thermostat per local codes, according to the inspector who's going to sign off on it...
    • Japery
    • Thread
    • code napoleon thermostat torch
    • Replies: 3
    • Forum: Napoleon
  16. D

    1 Thermostat running a Pellet stove and Furnace... Is this possible?

    Love the Forum, and this has kind of I been asked before, but I don't know for sure if what i am looking for will work. I have a Pellet stove i use as my main heat source, with a Natural Gas furnace as backup. I am using 2 separate thermostats currently, both Battery operated, and wires...
  17. R

    VC Defiant thermostat issues

    Recently, I purchased an old VC Defiant II parlor stove (wood stove). Apparently, someone had to install a new thermostat spring and put it on backwards - so when it heats up it opens the air flap - thus increasing the heat - thus opening the air flap more, etc. How do I remove the spring and...
  18. C

    25-PDVC Thermastat No Working plus.....

    I purchased a 3 year old stove and have it running, works very well. I have the stove in my garage. I would like to get the stove running off a thermostat and I have read about it on these boards. My issue is the tstat is not effecting the stove at all. My test was that I hooked the thermostat...
  19. K

    Traeger keeps feeding

    First time I've been exposed to a pellet stove, and it's a Traeger MPD040T circa 1986. I'm renting the house its in and the landlords are new owners (have no history with the stove). I used it last spring a few times when I moved in, but the thermostat didn't regulate stove operation well; once...
  20. A

    VC Large WinterWarm Air Probe/Thermostat Checking and Replacement

    Hi, I apologize if this is covered elsewhere but I couldn't find anything after some extensive searching. I have a Vermont Castings Large Winterwarm that has worked well over many years. Recently I've noticed a lot more smoke coming from the chimney when the damper is closed and there's...
  21. D

    thermostat issue with pellet stove

    I have a Quadra-fire Santa Fe - its probably about 6 years old. The thermostat seems to be in trouble. I have the lux cheapy heat-only manual thermostat. Only a couple of times did it know that the temperature had decreased and it turned on again, as it was supposed to. I had to hit reset for...
Top Bottom