blower

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. K

    Aftermarket Blower for T5?

    I need to add a blower to my Pacific Energy Alderlea T5. The price of the OEM blower is outrageous. Has anyone successfully installed an aftermarket blower on either this or a similar stove? If so, where did you source it? Thanks a ton.
  2. M

    New tundra ii, blower seldom runs

    Just finished installing new Tundra ii, had three contractors come and look at it, noon of them wanted the job. Was excited to get some heat out of it, but the blower kicks on very, very seldom. The fire send to burn ok, just no heat. I haven't hooked up to the thermostat yet, forgot to get the...
  3. P

    1983 CDW FA264CCL - Domestic issues. I need a quieter fan

    I have a Dutchwest FA264 ccl. It was purchased by the original owner in 1983 and was used for about 10 years. Not very much I might add. I bought it in 2008 and It was in very good condition. I did a lot of reconditioning to it and put it into production. I burn about 1.5 cord per year. The...
  4. M

    1987 Lopi Premier Answer Series PA5 - Blower Replacement

    Hey All, I have been looking for a blower replacement for my stove and can't seem to locate one. I have done quite a few searches and browsed the forums to see what I could find. I am not having any luck. Does anyone have any ideas of where I can get a replacement? Happy Heating!
  5. R

    Should I install a blower?

    Hello, When we purchased this house it had a wood burning inset installed in the den but it doesn't have a blower. There is a nice gap underneath where a blower could be installed, but I don't want to do anything that might burn down my house. There is a metal plate on the inside upper right...
  6. S

    Lopi Revere Blower Question

    I’m new to wood burning and we are loving our new Lopi Revere and the blower (~15 fires so far). I’ve read many people say the blower on low is “near silent,” but mine is quite loud. There isn’t a rattle or any other sound to indicate the fan is broken, it just sounds like a really loud fan...
  7. S

    The blower for TN-20 Insert

    Greetings, Since my husband and I decided to have a fireplace insert installed into an old stone fireplace at our cottage, I've been enjoying reading postings on this forum. Thank you very much for useful information! Although we originally considered EPI22 from Timberwolf, we'll probably go...
  8. Jaw818

    St. Croix Auburn convection fan

    The bearings went out of my fan last night, there are no dealers near me anymore, and online everything is $200 or more. Is there a cheaper option, or where can I get a bearing kit and how difficult is it to replace the bearings? Thanks in advance
  9. T

    Internal blower installation for Opel 3 - help!

    Hi all, We're replacing our existing fireplace with an Opel 3 fireplace and new chimney this week (following a chimney-related fire!). Tomorrow our electrician will be here to provide a power source for the internal blower (FO-FDHB5-N). Problem is, I'm confused what we need to tell him. Here...
  10. S

    Problems with Fireplace Xtraordinaire

    I have a new home into which the local dealer installed a 36 Elite (woodburning) Fireplace Xtraordinair. I've had this unit in a previous home with NO problems. (BTW, I'm at about the 4000-ft elevation.) The 1st issue was smoke infiltration...the installer came out & discovered a secondary...
  11. S

    When plugged in, exhaust blower not turning on (Quadra-Fire Santa Fe)

    Hello! We purchased a home this past August that had a Quadra-Fire Santa Fe pellet stove installed. They left us the manual and cleaning tools, which we have done bi-weekly and as needed. Being in Minnesota, we started using it pretty regularly this past November and never had any issues. Last...
  12. D

    Dead blower on older insert

    Hi -- made the move to a country home 12 months ago and became a lurker on this forum. Love the outdoors: chopping wood, etc., but less skilled in DIY. My first post. Our wood-stove insert seems very old, but it passed the home inspection and worked well. But a few days ago the fan stopped...
  13. Betterlysolutions

    Limit and blower shut off issue

    happy new year! I have a question... Actually a scenario i could use a little input on if you don't mind? It's an outdoor wood boiler another plumber installed and i combined an indoor navien system with it. There was a 6006c1018 aqua-stat installed on it to shut it down on temp rise but the...
  14. Lucky-Joey

    Noisy pellet stove

    Just bought a new house that came with a Thelin Parlour 3000 in the living room and a Timberwolf TPS35 in the family room. The 3000 looks beautiful, but makes so much noise, we don't use it. The Timberwolf is much quieter and we use it all day long. I suspect (based on other things around the...
  15. J

    Too little clearance to install blower

    I just got my gas fireplace going in a new home and would like to install a blower, but because there is a hearth in front and the fireplace rests slightly lower than floor level, I don't have enough clearance to install the blower. It's a direct vent Lennox propane fireplace and I have about 2...
  16. E

    direct vent gas fire place - blower connection

    hello everyone, I am new to this forum, and to the gas fireplace concept. I got a direct vent fireplace Heat n Glo. I installed a blower. Two wall switches in the wall, I think one for electrical one for gas (not sure why I need two) mystery, and that is I got a question for function of these...
    • edlu
    • Thread
    • blower electrical installation gas fire place
    • Replies: 4
    • Forum: It's a Gas!
  17. A

    Regency Blower noisy

    Hi guys; I have two Regency 2400. One has never given me any problems ever. The second has the noisiest blower on it I've heard. I had the motor replaced twice. I even located the manufacturer of the turbine fans as they looked lopsided and maybe caused flutter. The stove upstairs has the...
    • Andrew77
    • Thread
    • blower noisy regency replacement blower
    • Replies: 11
    • Forum: Regency
  18. B

    Name this fireplace (or help me find out how)/replacing refractory panels

    Hi All, First, thanks for taking the time to look at my questions. This is my first time posting so if you have any questions please feel free to ask (as I am sure I'll be missing some piece of critical information). My wife and I purchased our first home in June here in Maryland. When doing...
Top Bottom