Vogelzang vg5790

[vogelzang87]

Can not get stove to burn right. I just get lazy flame bad black soot. I have it vented into an exsisting masonary chimney which the manual states it should not be. But every tells me that should be fine, And it's the stove not my venting. Do I need to run run a 4in liner? Any suggestions?

 

[vogelzang87]

Also cleaned this unit very well!

 

[zinger827]

Is your air damper in back open? Sounds like not getting any air to burn pot?

 

[vogelzang87]

It does not matter where I move it flame does not seem to change at all

 

[vogelzang87]

I can feel it is sucks get air though

 

[3650]

try a different pellet. Theres alot of bad pellets out the this year. Get a well known brand and see how it goes.

 

[vogelzang87]

I have tried a 5-6 dif brands

 

[Don2222]

There are 2 ash trap covers on each side that must be cleaned out. Remove the 2 bolts and the silicone gasket and suck out all the ash.

 

[vogelzang87]

Did that

 

[vogelzang87]

Could it be because i have 3in adapted down going into 8in