This fall I installed two Harman P38 stoves with manual ignition. They are direct vented straight out through the wall. One is in our master bedroom (approx 400 square feet), and the other is in living room/dining room area (approx 800 square feet). From the start, the bedroom stove has taken a long time to get going when I ignite, and sometimes I have to try to start it more than once. It gives off moderate heat, but the flame always seemed kind of low. I'm new to pellet stoves, so I didn't really know what to expect. But when I ignited the stove in the living room/dining room, it started very easily (didn't do anything differently), and the flames were much higher, and it gave off much more heat (room would be at least 2-3 degrees warmer with same pellet and same setting). Based on what I described, does it seem like something is wrong with the bedroom stove? Any recommendations? Would appreciate any replies. Very helpful site here for us newbies.
Thanks
Steve