I read that the stove pipe coming out of the wall has to have a slight slant downward, just wondering if it's true and if so how much of a slant?
Also I'm new at this and I'm always open to the thoughts of people who know more about this than I so any input is always appreciated.
Little history:
Pleasant Hearth Stove 1800 Sq. Ft
Sits on slate tile, kitty-corner. Specs call for rear corners off wall (combustible) 12", I'm off the wall 20" and that's with removing the paneling and sheet-rock and adding one layer of durock.
Under the slate is cement, (basement), Calls for 8" on each side and 16" front, I'm 10" on the sides and 20" on the front (ok, so I have safety issues, lol)
Stove pipe: I'm planning on 36" straight out of the stove, then 90, then horizontal for 12", then 45 and then horizontal again for somewhere between 24" & 36"
Any idea's, help,problems that you see, etc, Thanks
Paul
Also I'm new at this and I'm always open to the thoughts of people who know more about this than I so any input is always appreciated.
Little history:
Pleasant Hearth Stove 1800 Sq. Ft
Sits on slate tile, kitty-corner. Specs call for rear corners off wall (combustible) 12", I'm off the wall 20" and that's with removing the paneling and sheet-rock and adding one layer of durock.
Under the slate is cement, (basement), Calls for 8" on each side and 16" front, I'm 10" on the sides and 20" on the front (ok, so I have safety issues, lol)
Stove pipe: I'm planning on 36" straight out of the stove, then 90, then horizontal for 12", then 45 and then horizontal again for somewhere between 24" & 36"
Any idea's, help,problems that you see, etc, Thanks
Paul