We have an older Lincoln scr. When you press the on button on the control board the power light does not come on but the burn pot rotates and the #4 light comes on. Nothing else happens then. Does anyone know what the problem could be?
St Croix Lincoln scr control board
- Thread starter tfunk
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
This indicates that the stove overheated and shut down
When the stove has cooled remove the power plug from
the wall socket in about 2 min. plug it back in and check
stove operation you may need a new high-temperature sensor.
If you don't have a manual here is one.
When the stove has cooled remove the power plug from
the wall socket in about 2 min. plug it back in and check
stove operation you may need a new high-temperature sensor.
If you don't have a manual here is one.
This is a St Croix lincoln scr mf stove not an Englander. We think it has something to do with when the unit goes into its cycling the clinker mode that this is happening. It will run fine for 10-12 hrs and then goes into shutdown
Sorry my bad had 2 manuals up sent you the wrong one
Similar threads
