Repairing cracked firebox mortar and bricks.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

sam08861

Member
Jan 30, 2019
112
NW NJ
My home's bulk/builder zero clearance fireplace had some cracks and I removed the loose bricks.

I removed the bricks and any rubble and am thinking to re-lay/point the bricks with refractory cement from caulk tubes. Any reason I shouldn't do this, if all seams are grouted?

Pics of the removed bricks and firebox.

[Hearth.com] Repairing cracked firebox mortar and bricks.[Hearth.com] Repairing cracked firebox mortar and bricks.[Hearth.com] Repairing cracked firebox mortar and bricks.[Hearth.com] Repairing cracked firebox mortar and bricks.
 
My home's bulk/builder zero clearance fireplace had some cracks and I removed the loose bricks.

I removed the bricks and any rubble and am thinking to re-lay/point the bricks with refractory cement from caulk tubes. Any reason I shouldn't do this, if all seams are grouted?

Pics of the removed bricks and firebox.

View attachment 336448View attachment 336449View attachment 336450View attachment 336451
Just replace the panel your "fix" won't last long. Also you should have the entire system inspected
 
Many thanks for the response bholler.

I found a tag on the unit with model # as Marco 792776E and open to suggestions on where to find the panel.

Thanks!

Sam


[Hearth.com] Repairing cracked firebox mortar and bricks.
 
Many thanks for the response bholler.

I found a tag on the unit with model # as Marco 792776E and open to suggestions on where to find the panel.

Thanks!

Sam


View attachment 336461
I don't think they are in buisness anymore but look it up. If not you can buy oversized panels and cut to fit
 
Gotcha and thanks agian.

Think I found a few, but are in the $1100+ range for the kit but did find the back panel dimensions to see if I can find one that won't have me just buying a whole new fireplace or more efficient insert.

Dimensions are 15 1/4" H x 21 ¾" W x 1" Thick


 
Gotcha and thanks agian.

Think I found a few, but are in the $1100+ range for the kit but did find the back panel dimensions to see if I can find one that won't have me just buying a whole new fireplace or more efficient insert.

Dimensions are 15 1/4" H x 21 ¾" W x 1" Thick


Yeah parts aren't cheap at all. And an insert isn't an option in that fireplace