Ps35 heater motor wont come on

[Dy103587]

Hi, new on here.
I have a ps35 that I changed all 3 snap discs as well as va cum switch. It starts and lights, exhaust fan works good. Only issue at the moment is the heater blower motor doesn't engage...ever.
I put 110 v to the motor and it works fine. I cleaned it all up and hooked ot back up. Still no engagement.
Aside from the control board, what ould it be??
Thanks---

 

[johneh]

Welcome to the forum
If the number one snap disc is OK and the blower works when jumped
then it is either wiring or control board

Snap Disc #1 (Convection Blower) 110°FSnap Disc #1 is located on the right side of the appliance behind the right side panel. There are 2 purple wires connected to it. This snap disc turns the convection blower on and off as needed. Power is always present at snap disc #1

 

[Dy103587]

Thanks for the info! I shall do some more testing!!