Painting Over Porcelain On Harman

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
S

stoaf88

Member
Hearth Supporter
Oct 19, 2009
235
RI
I just picked up a Harman Invincible T

It has been painted with an off white almond color porcelain paint.

There are a bunch of chips in the finish, which is like 1/8 of an inch thick.

Can I just sand down the paint and spray over it with enamel spray paint?

It does not need to be perfect I just need to make the stove look clean and non rusty again.

Below is a pic of the stove

[Hearth.com] Painting Over Porcelain On Harman
 
Ok So from what I have been reading online it seems that I can sand the stove with some 100 grit so the new spray enamel will stick.

Then just spray over everything.

Does this sound about right to you guys?
 
Status
Not open for further replies.

Similar threads

DanLee
Jotul 500 Rust
Replies
2
Views
1K
Jotul
begreen
begreen
L
Redoing wood stove and chimney and need various advice/thoughts/ideas
Replies
8
Views
307
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Don2222
Hudson River West Point up and out Selkirk DT install with custom lighted hearth!
Replies
0
Views
760
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
Don2222
Replacing a Harman flame guide easy? Not on a PB105 when a top cover bolt head snaps!
Replies
3
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
Mike Lawson
Rust inside wood stove: Was it safe to paint or should just use oil (overlong story ensues)?
Replies
11
Views
5K
Pacific Energy
begreen
begreen
Top Bottom