Need help on deciding on flush wood insert.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

EricC

Member
Hearth Supporter
Oct 17, 2009
13
PA
Due to my hearth limitations I can only use a flush insert. Width 34", height 29", depth 21.

The napoleon 1101 looks the most appealing since it will do up to 1500 sq ft and Fireplacestore.com has it with black doors and standard surround for under $1200 but I'd rather deal with a local dealer. I am aware of the blowing being in the back of the 1101.


I looked at Avalon perfect fit but it was over $3500
Regency 1200 $1700
Buck $1600
Jotul 550 was around $3000 IIRC.

All prices are uninstalled and without a liner. I am surprised there is this much variation in price.

Any feedback or advice is appreciated. Suggestion on other units to look at is welcome. I am looking at price but I usually buy what I find to be the best value if someone can convince me there is more value in the higher priced units.
 
Not sure if this is new to you, but did you look into the PE Pacific/Super/Summit. Might be one of the best overall values out there from what I hear. The Hampton inserts are made by the same company as regency. They're a little pricey as well, but they're very attractive and get good reviews. Have you read through the ratings/reviews on this sight. I found that very helpful in making a decision.
 
Jotul 450? The 550 is a 3 cu ft firebox and generally considered a larger insert. The 450 is perfect for 1500 sf. Edit. The 450 is not "flush". So with Jotul it is the 550 or the 350, at 1500' that is a tough call. I would go with the 550, you can always make a smaller fire in a large firebox.
 
Go with the 550, picked one up this year for about $2500
[Hearth.com] Need help on deciding on flush wood insert.
 
I went to a few dealers today. The Jotul seems over priced for what you get. I like the look but the clearances they ask for are more then most other manufactures so it doesn't look like a good fit. One dealer stopped selling them this season. I think I am going to go with the Buck. The local dealer hasn't sold many but has liked what they saw. They said they are very easy to work with for getting service and parts. They are calling Monday to confirm some information for me. I looked at the pacific energy and it was a nice set up but I like supporting a US manufacture.
 
I have the Buck 74 and got it because of clearances and price. So far it has been awesome. The fan is a bit loud but we've been very happy. This week we had a few mid 30's nights and it's worked great. Out house is an older ranch with 1800 sq ft on the first floor, very long with the Buck on one end. It still manages to keep our bedroom on the opposite side very confortable. It's rated for 2400 sq ft, but as many say, error towards slightly higher.
 
burnermm- Their ratings seem all over the place. If I can get it to work I think I'd like the 85 best since it has an ash pan. That means there stands the chance I will not be the only one ever cleaning it.
 
Why does it have to be flush?
 
I would vote for the Jotul too, however; it is not about my vote or anyone else. You need to decide what is right for you and your family. The Jotul's are priced a bit higher than other inserts due to the cast iron surround (it is a good looking insert, but at a higher price). It does not heat any better or worse than it's competitors and thankfully, I left the decision to my wife. Good luck, they will all allow you to burn less oil, gas or electricity.
 
The Jotul C550 was going for about $2500, which was the lowest price I could find. I would not pay $3,000 for it, they are just price gouging.

The installer for the C550 is a new addition to my family, who works for a chimney company (not the one with the Jotul).

Both him and his co worker who were doing install had some positive comments on the C550 based on some small design differences from the stoves they sell. They also couldn't get over the weight of the stove and the surround. This was an objective opinion from someone I could trust.

Good Luck
 
Doing The Dixie Eyed Hustle said:
Why does it have to be flush?

Hearth requirements. I'd have to use a mat if it sticks out. Wife says "NO"

There are two local Jotul dealers. One quit selling them and the other is way over priced. Liners $1200, install $900 Stove $3000. Not worth it and it will not fit into my fireplace because of the mantel requirements. I know there are a lot of Jotul owners here but it just is not the right stove for me. I really like the Avalon Perfect fit but at $3500 I don't see the value.
 
Just for yor information when you go shopping. I picked up the Jotul C550 for $2550, 30ft Flex Liner Kit for $525, and install was $500.

You can save a lot on the liner by shopping around and the install fee was from a family member and his co worker who did the install after work from their chimney company.

The install is pretty simple, but you need at least two men, dollies, ladders, a few tools and some basic experience. With the economy the way it is there may be a few "off duty" chimney workers who you can sub contract.

As far as inserts go, I would not pay more then the $2550 for the jotul c550, and you are using a different manufacter compare the quality and service to the Jotul and adjust your value accordingly. $3,000 is lit for just a stove.

I am not familiar with other makes and models but the guys who installed the c550 usually install Avalon, and the were impressed with the Jotul weight/heft, the cast iron surround, and the design with makes maintenance alot easier in their opinion.

I hope the prices make it easier to shop. If possible find a deal out of your area that maybe able to offer enough of discount to make worth the trip.
 
Most places are $550-650 for installation. Just the rip off Jotul dealer wants $900. I am talking to a member on getting a liner. Most local dealers are from $600-$800. I want to see if the Buck 85 will work. The ash pan should make clean up easier.
 
Most places are $550-650 for installation. Just the rip off Jotul dealer wants $900. I am talking to a member on getting a liner. Most local dealers are from $600-$800. I want to see if the Buck 85 will work. The ash pan should make clean up easier.

Somebody just posted a thread about liners that were a good deal. You can do better than the $5100 you were quoted. I was quoted $4500-$5200 for stoves with installs, I was looking for an insert too. I bought a BK Princess and got the liner for $470, my fiends is a chimney sweep, I help him and give him a few bucks but if he was too busy I would get a buddy and do it myself. You could probably do the whole ball of wax <$3500 for a good stove.
 
EricC said:
Doing The Dixie Eyed Hustle said:
Why does it have to be flush?

Hearth requirements. I'd have to use a mat if it sticks out. Wife says "NO"


Pshaw.
 
EricC - just want to throw in my 2 cents. Don't have a particular brand to reccommend, but a general thought based on my experience: go as big as you can with your insert/stove, even if it means letting it extend out onto the hearth and requires you to use a rug in front to protect your floor. If your wife likes the *warmth* from the stove as much as mine does, any aesthetic concerns will soon become a distant memory, especially compared to fighting the common small-stove problems of only handling short logs, not being able to get decent burn times, and an annoying lack of radiant heat. I started out with an insert setup with surround panels, and ended up removing the panels and letting the stove extend out onto the hearth. I could go on a long time about this, but suffice it to say that if I were going to write a treatise on woodstoves, the first chapter would be called "The Primacy of Exposed Surface Area". Good luck.
 
bagpiper said:
Go with the 550, picked one up this year for about $2500
[Hearth.com] Need help on deciding on flush wood insert.

How does your 550 meet the mantel requirements? It looks too close to me for what Jotul is calling for.
 
Status
Not open for further replies.