The stove is a 1992 or '93 I believe. It's my mom's stove and has been used at a summer/seasonal home since around '93. I did the leaf blower cleanout and pulled what seemed like an awful lot of soot, since it's only a 3' horizontal vent.
The problem that she's having is that the auger will not feed pellets. Both blowers come on, but the auger will not feed period. I bypassed the pressure switch and the limit switch on the combustion blower with no luck. The auger feed is controlled by a rotary switch on the board, which feels abnormally "tight" to me. I hate to see her spend $300 for a new board, if that's not the cause of her problem. So I wanted to ask here if there's anything else I should/can check that could possibly be preventing power to the auger motor before going for a replacement board.
Thanks.
The problem that she's having is that the auger will not feed pellets. Both blowers come on, but the auger will not feed period. I bypassed the pressure switch and the limit switch on the combustion blower with no luck. The auger feed is controlled by a rotary switch on the board, which feels abnormally "tight" to me. I hate to see her spend $300 for a new board, if that's not the cause of her problem. So I wanted to ask here if there's anything else I should/can check that could possibly be preventing power to the auger motor before going for a replacement board.
Thanks.