My Vogelzang 5770 lights and after about 15 min I get an E2 code. Some searches say it's a vacuum switch issue and others say it's an auger issue. Looking for some help.
My Vogelzang 5770 E2 code
- Thread starter Jjmaill
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
If you unplug the stove (take a photo of wires to component) take the 2 wires off the vacuum switch connect them together, dont let the wires touch the stove. Plug back in and see if stove operates normally.
Maybe, could be vac switch, auger, combustion blower or its clogged up and the blower can’t move air out the vent, the combustion blower is key to the entire stove operation. If it cant move air stove runs strange
Correct or the hose and or stove nipple may be plugged with ash
Similar threads
