Looking for a pellet stove thimble for a Pellet Vent Pipe 5 5-inch outer diameter.

[SwampLife]

I have a Jamestown J1000 that came with an OEM pellet vent pipe that is designed to vent and draw in air as well. The inner diameter is 3 inches and the outer diameter is 5 inches. I'm having a really hard time finding a thimble for it.
Any suggestions?

 

[johneh]

Duravent Pro Wall Thimble Small for Direct Vent Pipe 5"ID x 8"OD: 58DVA-WTSDefault Title

This DirectVent Pro Wall Thimble provides a complete wall-pass-through and firestop. Use with Round Horizontal Cap, Sconce Cap and H2 Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer’s installation instructions for requirements.

pellet-stove-parts-4less.com

 

[SwampLife]

Duravent Pro Wall Thimble Small for Direct Vent Pipe 5"ID x 8"OD: 58DVA-WTSDefault Title

This DirectVent Pro Wall Thimble provides a complete wall-pass-through and firestop. Use with Round Horizontal Cap, Sconce Cap and H2 Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer’s installation instructions for requirements.

pellet-stove-parts-4less.com

Thanks. I just messaged them. I think this one is for a specific system but just checking

 

[johneh]

You could always you the B vent for gas thimble they come in 5 in.

 

[SwampLife]

You could always you the B vent for gas thimble they come in 5 in.

Yes! For some reason the gas thimbles, even though they say 5 inches they are 5.5 inches?