I have had this stove for 8years and have been pretty pleased with it. I have noticed that in the last two weeks I am going through wood...fast! reload in about an hour with the dampener all the was to the left. I start looking for problems and here are some that I have found:
1. Both the ash door and the glass door are hanging low on the latch side.
The glass front door is about a quarter inch low?
Do the pins and or spacers wear out? What else can I do to get things lined back up?
2. I am getting almost no seal on the ash door.
Are gasket replacement sets easy to install?
Anything else I should look for?
I need advise. I am about 2 hours from the dealer and need information before I drive up there.
Please help,
thank you,
Mike
1. Both the ash door and the glass door are hanging low on the latch side.
The glass front door is about a quarter inch low?
Do the pins and or spacers wear out? What else can I do to get things lined back up?
2. I am getting almost no seal on the ash door.
Are gasket replacement sets easy to install?
Anything else I should look for?
I need advise. I am about 2 hours from the dealer and need information before I drive up there.
Please help,
thank you,
Mike