I need some help, please....three year old Castile making a ticking (chattering) noise at start up

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

Augmister

Minister of Fire
Hearth Supporter
Jun 16, 2008
502
Socialist Republic of RI
I did a stove fire box cleaning yesterday. Dropped and cleaned the exchanger tube baffle (top of fire box) and pulled the rear baffles to get all the dust out. Vacuumed out the dust in that fan behind the right baffle. When I restarted the stove by turning up the thermostat, after the "click" (when the stove goes on and the red light goes on- demand for heat) I normally hear what sounds like a slow rpm whir of a start up fan (not the fan blowers when the box is up to temp and the hot air comes out through the tubes in front). Well, that whirring (which is pretty quiet) now has some "chatter." The chatter is drowned out by the other stove noises but does not go away.
Does anybody know what is wrong? I get antsy when things are not right with the stove and this chattering noise means to me something has changed. Ideas? Thanks!
 
During cleaning did you notice the fan fins behind the right side baffle plate? That is your combustion blower. Its possible you partially cleaned it and now its unbalanced, or maybe during cleaning a bunch of stuff fell in it that you did not vacuum up.
 
I noticed that if you put the right rear baffle on the left side and vice versa you get a clinking noise during start up. Make sure the "bricks" line up.
 
Status
Not open for further replies.