I have a 2011 Harmon XXV-TC pellet stove with the touch screen control, I have done regular maintenance 3 years I will shut the stove down before I go to bed at night mainly because it is not too cold overnight this time of year and when I get up in the morning my house temp is 63 the stove temp on the touch screen says 85 and I know that can't be right, I have the little controller deal on the wall approx 15 ft away that tell the stove when to turn on and off and it is set on the touch screen to come on when the house is 72 but when winter gets here I will at times want to have the stove come on at about 69-70 at night and if the touch control stays at 85 the house will get cold but the stove will not respond until its 85? what am I missing here it has been running great the last 3 years this is the only glitch has had.
I am confused here with my Harmon XXV-TC with touch screen
- Thread starter whistledick
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
ARC
Minister of Fire
Try opening the stove door and feel if it is warm inside stove, is the ignitor stuck on keeping stove warm?
OK, what I found out was the sending unit that is mounted on the wall approx 15-30 feet mine is 19 feet which is ok, but it was sending the wrong information to the stove I brought in a good indoor thermometer that read 76 in the room and so I read what it was telling the stove and it was 86 so I need to be getting a new sending unit.
Similar threads
