I walked into my house while ago to a 77-78 degree inside and 62 or so outside and the stove was still burning away. i have it set around 75 degrees on room temp auto. My probe is extended and is 10 feet away from the stove. I touched the probe and the status light status light stayed on and turned it to 50 and it continued to stay on and feed pellets. I even tried a hair dryer and it gave me a 4 blink stated a failed probe. But after a few blinks it cleared up. But it continued to feed and status light stayed on. One thing is that the convection blower and light does go out. Any thoughts?