Fence gate sag latching wood!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Don2222

Minister of Fire
Feb 1, 2010
9,110
Salem NH
Hello
Common problem here, the new gate settled. The hinges can reset the height but what about the latch? The gate is not latching by itself anymore and the 2 screws are slowly stripping from the latch striker! Yesterday they finally have way and the light vinyl door (just like the song) is blowing in the wind!
This is the original latch with the ridged 2 bolt lever that must be in the same place or it will not work!
https://m.lowes.com/pd/BOERBOEL-4-1-2-in-Stainless-Steel-Gate-Latch/50290457

After a lot of research, I found this!
Auto self adjusting after a sag up to 1/2” :)
https://m.lowes.com/pd/National-Hardware-4-1-8-in-Black-Gate-Latch/50414122

Now the problem is that the wire to the other side is stiff and preventing the fence from latching by itself when the gate hinge springs close it?
I tried changing the wire to twine and it works more often but not every time when I take the wire or string off!!
Any suggestions?
My guess is the hole is too close to the top of the latch and maybe if was higher up, that may help?
Or even more flexible nylon rope? Or small chain?
Pic 1-2 Original latch with rigid 2 screw striker
Pic 3 New self adjusting latch
Pic 4-7 shows latch self adjusting
Pic 8 - Shows twine that helps latching but still not 100%
 

Attachments

  • FA3960E6-7FE8-488D-88B9-410CF82EE766.png
    FA3960E6-7FE8-488D-88B9-410CF82EE766.png
    120 KB · Views: 191
  • DA2E0C44-8C70-4BD8-817F-86B10A98EEDD.png
    DA2E0C44-8C70-4BD8-817F-86B10A98EEDD.png
    94.7 KB · Views: 167
  • 57AE986E-5CC9-4FA7-8FAD-D38F804CACF3.jpeg
    57AE986E-5CC9-4FA7-8FAD-D38F804CACF3.jpeg
    139.7 KB · Views: 187
  • 964F2746-5D8B-466D-8B92-D24ACF63F8BB.jpeg
    964F2746-5D8B-466D-8B92-D24ACF63F8BB.jpeg
    70.3 KB · Views: 187
  • 6ACC42D8-09A2-4048-97A2-FA7AC7A66EC6.jpeg
    6ACC42D8-09A2-4048-97A2-FA7AC7A66EC6.jpeg
    70.1 KB · Views: 175
  • 17093FEF-E2F1-4762-AC31-D67AB5C4F7B4.jpeg
    17093FEF-E2F1-4762-AC31-D67AB5C4F7B4.jpeg
    72.1 KB · Views: 184
  • D6572755-1A06-47D2-A71B-F87E92110756.jpeg
    D6572755-1A06-47D2-A71B-F87E92110756.jpeg
    71 KB · Views: 183
  • 1BC545D9-82F3-4070-9881-7CCB4939228D.jpeg
    1BC545D9-82F3-4070-9881-7CCB4939228D.jpeg
    70.6 KB · Views: 193
Last edited:
Could fill the stripped holes with high-performance wood filler (like bondo), then re-drill and re-screw the original latch back in place.
 
Could fill the stripped holes with high-performance wood filler (like bondo), then re-drill and re-screw the original latch back in place.
Thanks but the original latch was in the wrong place after settling. The new self adjusting latch has 4 bolts instead of 2 for more strength and works great!
 
That little ball chain you see on sink plugs would work well
Hello
Well, I drilled a hole 5” higher with the flexible twine and it works! Now I am thinking some nice small stainless steel chain like you suggest or nylon rope like they use on pool thermometers would be more durable and weather proof??
Now I have to plug the other 2 holes!
Should it be this difficult???
 

Attachments

  • 1032AFFF-3EED-4E17-8ED3-669D5F1313C0.jpeg
    1032AFFF-3EED-4E17-8ED3-669D5F1313C0.jpeg
    81 KB · Views: 184
  • 56371213-6255-4712-9EFA-E56EC79B55BF.jpeg
    56371213-6255-4712-9EFA-E56EC79B55BF.jpeg
    103.2 KB · Views: 165
  • E79EABDC-D741-48EF-A0BE-53A5C712BC17.jpeg
    E79EABDC-D741-48EF-A0BE-53A5C712BC17.jpeg
    76.7 KB · Views: 148
U can usually get matching plugs at any hardware store or a place the does windows and doors...

Sent from my SM-G950W using Tapatalk
 
  • Like
Reactions: Don2222
How about a tension spring from the top of the catch to the edge of the latch? My experience with these things is that the string is too stiff, too heavy, too sticky to allow the catch to drop back down after pulling for release
 
How about a tension spring from the top of the catch to the edge of the latch? My experience with these things is that the string is too stiff, too heavy, too sticky to allow the catch to drop back down after pulling for release

Yes, a tension spring that does not rust would be good
The nickel plated steel chain seems good
See pics and vid!
Vid 1 - closing gate shown from the front


Vid 2 - closing gate shown from the back
 

Attachments

  • 1DDC7130-2C05-4FE5-B471-5D881A48F6A8.jpeg
    1DDC7130-2C05-4FE5-B471-5D881A48F6A8.jpeg
    66.4 KB · Views: 138
  • 807D962B-DCE9-4542-9C05-9076E0E0F826.jpeg
    807D962B-DCE9-4542-9C05-9076E0E0F826.jpeg
    75.7 KB · Views: 130
Hello
Well, I drilled a hole 5” higher with the flexible twine and it works! Now I am thinking some nice small stainless steel chain like you suggest or nylon rope like they use on pool thermometers would be more durable and weather proof??
Now I have to plug the other 2 holes!
Should it be this difficult???

How about fishing line?
 
Not happy with the chain I had so I went to the only thing that works every time that was invented by a contractor and made in the USA. :)
Gate Latch Cable with spring, :)
Works great! $9.99
 

Attachments

  • 2B2F5886-D70F-4B25-986D-9981C3B85063.jpeg
    2B2F5886-D70F-4B25-986D-9981C3B85063.jpeg
    108.3 KB · Views: 128
  • 70ABCB27-CB2B-489C-B8D4-1E5E52659C9A.jpeg
    70ABCB27-CB2B-489C-B8D4-1E5E52659C9A.jpeg
    133.8 KB · Views: 124
  • 35E8548C-9C24-4D39-83FD-80B5793A5A5B.jpeg
    35E8548C-9C24-4D39-83FD-80B5793A5A5B.jpeg
    88.4 KB · Views: 134
Nice solution. I have the same problem. Will try this out.
 
I tried it and I love it! This has bugged me for the past 3 yrs. Finally, the gate latches every time. This may be the best tip I have picked up from here. Thanks,
 
  • Like
Reactions: Don2222