Enviro Empress insert has power, nothing else working.

[NateMitch23]

Hey everyone, my wife and I just acquired an Enviro Empress insert. It was missing the exhaust blower when we got it. I ordered a brand new one and just installed it. I have power to the unit and controls but when I click On, nothing happens. It clicks on the mother board but no other noises or anything. I do however, see a yellow blinking light on the motherboard. Not sure what that means if anything. Any ideas on what to check on next? the techinal support manual is not much help. please help

 

[Bioburner]

Welcome. First will get a better thread title so others with same can notice

 

[NateMitch23]

Welcome. First will get a better thread title so others with same can notice

I'm sorry I'm new to this. What should it say

 

[Bioburner]

I changed it already.

 

[skinanbones]

Seeing as this stove is new to you, just to be safe i would replace the fuse on the motherboard. That way you know it's for sure good and causing things to go screwy

 

[NateMitch23]

I checked the fuse out, it looks good. There's nothing to those. I wouldn't have any power if it were faulty. Correct?

 

[Bioburner]

Depends on if the power indicator light is pre or post fuse. I have seen the filament break at the inside of the cap and be invisable so a test with multimeter is the only true way to test for a good fuse.

 

[skinanbones]

just like Bioburner said test with a multi meter to see if its good or just replace it to be sure.