Good Evening all-
I have a 2006 2200 sq foot englaner model stove. Yesterday I came downstairs to the stove off...I went to restart it and noticed that the lower auger was not moving. I did not have time yesterday to look at it, so today I came home and tore it apart. I think I either had a jam in the auger or a vacuum line problem. FYI...the vac line came undone from the top switch when I was removing the augers. When I took all the pellets out and reinstalled the bottom auger, it worked. Problem is that now the top auger is not moving.
I know it was working yesterday prior to pulling the stove apart today. I have a feeling that it has something to do with the vacuum switch, but I am unsure of where it should be ect. If anyone has any info on this, it would be great!
Thanks!
I have a 2006 2200 sq foot englaner model stove. Yesterday I came downstairs to the stove off...I went to restart it and noticed that the lower auger was not moving. I did not have time yesterday to look at it, so today I came home and tore it apart. I think I either had a jam in the auger or a vacuum line problem. FYI...the vac line came undone from the top switch when I was removing the augers. When I took all the pellets out and reinstalled the bottom auger, it worked. Problem is that now the top auger is not moving.
I know it was working yesterday prior to pulling the stove apart today. I have a feeling that it has something to do with the vacuum switch, but I am unsure of where it should be ect. If anyone has any info on this, it would be great!
Thanks!