Drolet Eco-45 Pellet Stove Problems HELP

[Jimywest]

We purchased an Eco-45 pellet stove locally from a dealer and have run into several problems. The first time the stove stopped working we had been running it on high (6) for about an hour or so nad got an H1 error code. Thru reading this forum....not the manual...we did the Mode and Reset button fix and got the stove reset and fired it up. It worked good for 4 days and we had the stove set on 3 and got the same error code (H1). Now we can't get it reset at all I put in a jumper on across the L250 and still no reset. I tested the sensor and the N.C sensor did seem to be closed. So now we are at a loss.....we are going to call our dealer and Drolet tomorrow and see what they got to say. From reading elsewhere in this forum it seems to becoming a common problem. Anyone got any suggestions??

 

[pete324rocket]

I discussed this problem in an earlier post...use the search function for "drolet" in the pellet stove section.Short on time-get back to me if you still aren't there.

 

[pete324rocket]

the link is here....please read the WHOLE thread before you act!

https://www.hearth.com/talk/threads/14471/

 

[DougMorency]

Update from Drolet for reset code for my stove.

The two button reset of the H1 is not working for me, so I talked to Anne at Drolet this morning and here is the reset that she game me.

Press the “Mode” button and release
Press the “+” button and release
Press the “-” button and release
Press the “quiet” button and hold for 3 to 5 seconds.

The stove will reset/or power off and all should be fine.

I will try this when I get home from work tonight smile