So here is my situation. Two months ago my family moved into our home which we had built last fall. We built an A Frame house which called for a 6' wide chimney at the front of the house and extendend to the peak, which is approximately 32'. The chimney was a real focal point of the house plan which I wanted to keep, but I didn't want to pay for a masonary chimney (I cheaped out). I instead had the contractor make an exterior chase that enclosed a Class A chimney, and covered it in faux stone. I was very happy with the final product since it looked exactly like I had hoped. My problem came about when we had a few windy days over the past few weeks. We built our house in a area that is notoriously windy, and we have been finding that the chase, since it's hollow, makes ALOT of noise in the wind. I am hoping that someone on this site has, or knows of someone who has a similar setup, or has some idea how I could go about solving the problem. I has really dug my self a hole here since I can't afford to tear down the perfectly good chase, (not to mention that the faux stone covering was fairly pricy) but the noise is driving me nuts.