Newly installed (thursday) avalon insert. We ran power up the old cleanout using BX cable, a metal box, etc. just like the installer said to prior to installation. I ran a shop vac and a makita grinder together for 1/2 an hour straight the night before prepping the opening of the fireplace for insert. It worked fine.
Insert gets installed. Guy tells me the blower will kick on after stove gets to temp. We wait, wait, and more wait. Finally after 3 or more hours the blower kicks in for 30 seconds and then shuts down. 2 hours later the blower goes again for 10 seconds and stops. 2 hours later same thing. Nothing since then and the insert has been going strong the whole time.
We have power, the blower does work. Any ideas what is happening and can a motivated homeowner fix this? Would love to hear some suggestions. Thanks!
Insert gets installed. Guy tells me the blower will kick on after stove gets to temp. We wait, wait, and more wait. Finally after 3 or more hours the blower kicks in for 30 seconds and then shuts down. 2 hours later the blower goes again for 10 seconds and stops. 2 hours later same thing. Nothing since then and the insert has been going strong the whole time.
We have power, the blower does work. Any ideas what is happening and can a motivated homeowner fix this? Would love to hear some suggestions. Thanks!