Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
I resently ran acrossed these cast iron boilers, they can burn wood or soft coal, they also have some of the most efficient oil boilers I have found. Very cost effective units.
Here the web site www.qhtinc.com
They've been discussed here for a couple years - the original model looks like it is most coal - or dirty with wood - but I like the looks of that new pirowood model.
I have a 3-wood6. I use sub-bituminous coal. I heat 3400 sq. feet, off-grid with ~16 watts continuous power requirement and 5-6 tonnes of coal per year. The coal costs $40/tonne so fuel is $200-240 per year. I clean it about every 3 weeks. Only downside is the ash pan is small and when burning coal I have to empty it twice a day. I stoke it twice a day in cold (-40- -15C) weather, once a day in cool (-15 - 0C) weather and every 2 days in mild (above freezing) weather. If I stoke at least once a day, I can light the fresh coal off the glowing coals so there's no re-kindling. House is T-shirt toasty. We hit -38C this past winter with the baby running naked around the kitchen.