Autonom Robust Gasification wood Boiler support group

[salecker]

Here are the emission specs of the froling S4 turbo 50w-60kw boilers. How do they compare to the Autonom, I don;t how to do a comparison as autonom is g/hr and this mg/m3?
View attachment 328403

Unless the testing is done with the exact same procedures...
there is no real way to compare the results

 

[hyfire]

Can someone tell me what other boiler I should be looking into that is under $15k and csa approved for at least 50kw, that is a better choice then the Autonom?

 

[hobbyheater]

You should talk to your WETT inspector and find out if it's not EPA phase 2 compliant can it pass the inspection. In BC, to pass a WETT inspection on any new installation, the unit has to be EPA phase 2 compliant.

 

[hyfire]

I will be posting the emission specs of the boiler on the facebook group for those interested. https://www.facebook.com/groups/511442771236993

 

[brenndatomu]

I will be posting the emission specs of the boiler on the facebook group for those interested. https://www.facebook.com/groups/511442771236993

Gotta join to see, huh?

 

[hyfire]

Yes, and lots of other info will be coming online soon.

 

[salecker]

Online info that you will share here?

 

[hyfire]

Not sure can you attach pdf. files here?

 

[brenndatomu]

Not sure can you attach pdf. files here?

should be able to

 

[hyfire]

Not sure can you attach pdf. files here?

I have to ask the manufacturer if i can publicly release the new manual.

 

[hyfire]

The only issue I am seeing with this boiler is the burn times are not as advertised. I can only get 1.5 hours of usable heat out of roughly 5-7 cu.ft of wood. This should be 3-4 hours. All the parameters are within specs for draft and flue temps.

 

[brenndatomu]

That burn time is worse than an old school wood burner...