I was wondering before i bought a blower for the 30nc stove if there were any after market alternatives available. I have looked and looked and ultimately my plan is to set up a vent system attached to the blower on the stove. What I mean is, cut floor registers on exterior walls of separate rooms in house and run duct work to a center location in basement and from there attach the duct to the intake of the blower of wood stove on main floor. But from what I have seen there are no blowers with a duct connection on the intake side of the blower. To me this seems like best option for heat distribution (suck cold air from exterior walls of rooms, feed that air to stove that is located in center of house, therefore air being replaced with warm air from stove). If i can't find a blower that will fit, I can also just install an inline duct fan and custom build a "plenum" that attaches to rear of stove where the blower would attach. Any thoughts other then using box fans?