25-PDVC

[Sheppard]

Here’s one for you guys, I guess when I loaded back of truck with pellets there was a loose nail in back of truck. That thing must have punctured the bag of pellets and I had no clue and eventually that bag got poured into hopper. Cleaned out hopper and bam there it was stuck under my top auger….. awesome. So now my question is, is there any type or reset or fuse protecting this motor? Or am I ordering new motor? Can order new one right away just wondering if that may be jumping the gun. Thanks for any help.

Tyler

 

[johneh]

Feed it voltage and see if it works
Just remember the hopper lid has to be closed so it will work
when in service
Welcome to the forum

 

[ARC]

Check your set screw on auger collar make sure it did not sear it off.

 

[ericofmaine]

If the stove turns on then your fuse is still good (there's only one on this stove). If you want a visual to follow up with what John said you can manually hold down the hopper lid switch to confirm its running.

Eric