damage

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. L

    Jotul F305 Damage

    Hi, Cleaning out the stove we noticed this damage on the bottom towards the front. It’s like a chunk of metal has broken off. Has anyone had anything like this? I’m wondering if we could have burned too hot or how this could have happened and if the stove is still safe. It’s less than a couple...
  2. JordanScott90

    Water leak and rust issues on RSF onyx fireplace

    Hello! Just recently I have become aware that I have rusting going on in various issues in my 13 year old onyx fireplace by RSF-ICC chimneys. Unfortunately at the moment the soonest I can get someone to come down to inspect the unit is late October. This is a concern to me because We use this...
  3. haydensa1986

    Lopi Liberty 2020 issues

    I have just had a new Lopi Liberty 2020 installed. When it was first run, I think it ran too hot as the air pipe and baffles on the top of the firebox were glowing orange. When the fire cooled and I had a chance to inspect it, it looked like some of the paint/coating has been burned off the air...
  4. M

    Using top vent without bolting down ok?

    I've recently bought a old Jotul F3TD, a beautiful stove. I intend on top venting due to my space configuration. The top vent flu collar bolts have rusted and broken off. It's expensive to replace the whole flue collar. Do I need to bolt the flue collar in, or can I use the weight of the flue...
  5. A

    Damaged Fire Brick

    Hey, I have an older regency r14 insert. After burning one day, I saw there there was a strange cement like deposit of the floor. I went to get it off and chipped a firebrick on the floor. The chip is about 1/4 in deep and 1/2 inch across. I plan on replacing the fire brick soon, but is...